Winch Accessories

Carbon Winches Wireless Remote Control kit. Plug in replacement of the receiver box inside the control box with a matched remote controller. 

Carbon Winches winch motor breather parts kit - no hose included.  3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.    Included in the kit:  Right angle push to fit threaded breather to motor fitting right angled mounting bracket self drilling mounting screw with urethane washer brass porous breather fitting and push to fit fitting for the breather end 

This winch rope thimble allows you to complete an eye splice while offering some form and support for the eye. The thimble is made from stainless steel and is resistant to corrosion.  The thimble is suitable for use for 10-12mm synthetic winch ropes. 

Carbon Winch 4500lb Replacement Synthetic rope kit

If you have purchased the Carbon Winches Wired Remote Control Plug Extension Kit -Suit V2 and V3 Part number CWA-PLUGEXTKIT_V2  and you are finding it difficult to fit due to clearance issues. This is a replacement  housing that turns the straight plug into a 90 degree elbow.

Carbon Winches Australia Fully Sealed Solenoid - 500amp peak rating    

Double your line pull with a Carbon Offroad  ATV/ UTV  Snatch block pulley  - 4000kg rating - Makes it easier to recovery your ATV - Less strain on your winch    

Polished billet aluminium fairlead   

Carbon Winches Australia Fully Sealed Solenoid - 500amp peak rating Our solenoid is supremely reliable. With zero warranties or failures since its release, you can be sure this solenoid unit will do the job for your winching duties.   

Get some beef on your rig, make a statement or simply upgrade from your standard fairlead for a more supportive fairlead for your rope. The larger radius will improve the life of your rope by supporting it through the change of direction as it feeds into the winch drum.

50 Amp Replacement Midi Fuse

AUZ12 Winch Ropes - Australian Made Winch Ropes 100 % 12 Plait UMWPE fibres with Polyurethane coating. 11mm x 26m suits most low mount winches Bright covered soft eye splice for high visibility and protection of the splice. Rope Specs: Melting point � 150�C Specific Gravity � 0.97 (floats) Water absorption � none UV Resistance � Good Characteristics: Maximum strength to weight ratio and strength comparable to steel cable Lowest elongation Longer life and easy handling Good abrasion resistance Non-kinking and non-rotational Easy to splice DIAMETER (MM) 11 APPROX BREAK(KGS) 11,000kg COLOURS Grey Only

This is a 3mm steel powder coated bracket that allows the user to remotely mount the Tank series winch control box using a single mounting point to the fixture. The adjustable mounting slot allows for adjustment of the position of the control box bracket, It is also long enough to accept more than one mounting bolt should you wish. We would recommend an 8-10mm mounting bolt. This updated bracket also allows fitment to mount the controlbox over the motor. The dimensions are 150 x 100 x 15mm We would recommend using through bolts with washer and nyloc nut for the mounting of the control box to this plate. Cap head bolt of four quantity of 5mm x 30mm total or 25mm thread length is the required minimum length for control box mounting.

100 Amp Replacement Midi Fuse