Speakers, Lighting and Powerbanks

EcoXCharge+ is a 100% waterproof 3200mAh power bank with built-in 150 Lumen Cree® LED flashlight. EcoXCharge+ is designed to provide complete protection from the Earth’s elements. The EcoXCharge+ will charge your smartphone and other USB devices for those situations when you need backup power. The EcoCharge+ will also provide plenty of light when camping, hiking or any emergency.   Tech Specs   Features Rugged & IP67 Waterproof Shock Resistant The 150 Lumen Cree® LED flashlight has four light modes: low, high, flash, SOS. 32 hours of operation at low, 8 hours at high. Built-in Battery: Lithium Rechargeable (3,200mAh) USB: 12" USB to Micro-USB Charge all USB devices, (5V 1.0A) Size & Weight Width:    125mm Height:    30mm Depth:     32mm Weight:   129g Input & Outputs Micro USB battery charging input jack USB Type-A device charge output jack Power Powered by Rechargeable Lithium Battery Battery size: 3,200mAh battery FAQs Is the EcoXCharge+ waterproof & can the EcoCharge+ be used in water? YES. The EcoXCharge+ meets the IP67 waterproof standard. The EcoXCharge+ can be used in the pool, the hot tub and the ocean without issues. Be careful, the charging cap must be closed properly to keep the EcoXCharge+ watertight. What is IP67? The IP67 Waterproof Standard means that the product is protected against water immersion. ECOXGEAR tests all their products by submerging them in AT LEAST 1m of water. This means that our products, including the EcoXCharge+ can withstand use in the water. Be careful of other products that claim to be waterproof but are only IPX5 or less. They will leak and sink to the bottom of the pool under the fun conditions above. Does the EcoCharge+ need any batteries? No, the EcoXCharge+ comes with a built-in Lithium-Ion rechargeable battery. It usually takes 2.5 hours to fully recharge from a low battery state.

IPX7 Waterproof Carabiner Powerbank. The EcoXCharge Clip is a carabiner powerbank that charges all USB devices, for the ultimate in multi-purpose convenience while on the go. With a rugged design perfect for those who enjoy camping, boating and an active lifestyle, the EcoXCharge Clip includes a built-in battery of 3,350mAh for a long rechargeable life. The integrated large carabiner is easy to attach to a daypack for convenient access when hiking, camping, or cycling, or keep handy at sporting events and festivals.   Tech Specs   Features Rugged & IPX7 Waterproof Shock Resistant Integrated large Carabiner for easy carry Built-in Battery: Lithium Rechargeable (3,350mAh) USB: 12" USB to Micro-USB Charge all USB devices, (5V 1.0A) Size & Weight Length:  6.5cm Width:   2.3cm Height:   11cm Weight:  95g Input & Outputs Micro USB battery charging input jack USB Type-A device charge output jack Power Powered by Rechargeable Lithium Battery Battery size: 3,350mAh battery FAQs Is the EcoXCharge Clip waterproof? Yes. The EcoXCharge Clip meets the IPX7 waterproof standard. The EcoXCharge Clip can be submerged and exposed to water, as long as the rubber cap is on the charge port. Make sure the EcoxCharge Clip is fully dry before using. What is IPX7? The IPX7 Waterproof Standard means that the product is protected against water immersion. ECOXGEAR tests all their products by submerging them in AT LEAST 3 feet of water. This means that our products, including the EcoDrift can withstand use in the water. Be careful of other products that claim to be waterproof but are only IPX5 or less. They will leak and sink to the bottom of the pool under the fun conditions above. Does the EcoXCharge Clip need any batteries? No, the EcoXCharge Clip comes with a built-in Lithium-Ion rechargeable battery. If the battery is drained, use the provided USB cable to re-charge. It usually takes 2.5 hours to fully recharge from a low battery state. User Manual Download our user manual to get a full understanding of our product.  

The ECOXGEAR handlebar mount is designed to be used with the ECOXGEAR EcoEdge+ and EcoPebble Lite and will fit any handlebar or round tubing up to 1 ¼ Inch in diameter making this mount ideal for bicycles, motorcycles, mountain bikes, BMX, Road bikes, Jet skis, and even snowmobiles. This handlebar mount is light and made from super durable materials to ensure that your speakers are fitted securely at all times. They’re also very easy to install and remove if you plan on attaching your speakers to another one of your vehicles. The mount also has a swivel ball connection that allows you to rotate your speaker a full 360 degrees, allowing you to adjust it to any angle you like for the best music experience. Despite its simplicity, this handlebar mount is extremely versatile! Suits: EcoEdge+, EcoPebble Lite   Size & Weight Width::  70mm Height:    100mm Depth:   35mm Weight:   62g User Manual Check out our full product range spec sheet  

The ECOXGEAR suction cup mount is designed to be used with the ECOXGEAR EcoEdge+ and EcoPebble Lite. Its powerful vacuum grip makes it perfect for mounting to your paddle board, surfboard and dashboard! A swivel ball connection with tightening ring is provided allowing full 360-degree rotation and tilt to achieve positioning in just about any angle. This is the perfect accessory for all your daily adventures!  Suits: EcoEdge+, EcoPebble Lite   Size & Weight Length:  6.35cm Width:    6.35cm Height:   6.35cm Weight:  74g.

IP67 waterproof Bluetooth® speaker with compact, rugged styling & RGB LED party lights. Featuring a booming 20W speaker and large passive sub-woofer, the EcoEdge Pro has incredible sound in a portable package, and is still tough enough for every outdoor adventure. Includes an EcoTalk button for Google and Siri voice activation.  New updated features include 20 mode color syncing LED party lights and EcoCast capable to over 100 units.          Tech Specs Features IP67 Certified Waterproof & Dustproof Shock Resistant / Submersible / Floats RGB Party Lights – multi-colored light with 20 color modes Big sound & long playtime packed into a slim, rugged, and portable size Loud 20W Max speaker with large bass enhancing passive woofer 20+ hours of playtime EcoTalk button for easy activation of Siri and OK Google voice assistant EcoCast compatible - pair 100 units together for stereo sound Bluetooth 5.0 streams audio wirelessly from up to 100 feet away via your Smartphone, tablet or any Bluetooth enabled device Bottle Opener Includes carry lanyard and carabiner.  Patents Pending Size & Weight Height: 13.7cm Width:  13.8cm Depth:    5.8cm Weight:  0.5Kg Input & Outputs USB-C Charging input jack 3.5mm Aux-in port for wired connection Power Powered by Rechargeable Lithium Battery Battery size: 3,200mAh battery, 3.7V FAQs Is the EcoEdge Pro waterproof & can the EcoEdge be used in water? YES. The EcoEdge Pro meets the IPX7 waterproof standard. The EcoEdge can be used in the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! Plus, the EcoEdge Pro floats! (Be careful, the charging caps and waterproof compartment must be closed properly to keep the EcoEdge Pro watertight.) What is IPX7? The IPX7 Waterproof Standard means that the product is protected against water immersion.ECOXGEAR tests all their products by submerging them in AT LEAST 1m of water. This means that our products, including the EcoEdge Pro can withstand use in the water. Be careful of other products that claim to be waterproof but are only IPX5 or less. They will leak and sink to the bottom of the pool under the fun conditions above. Does the EcoEdge Pro work with any Bluetooth enabled Device? The EcoEdge Pro waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the EcoEdge Pro be away from my Bluetooth device? The connectivity for the EcoEdge+ is designed and tested to far exceed 9m (30feet) (up to 30m (100ft)) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the EcoEdge Pro. The EcoEdge Pro will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your EcoEdge Pro and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your EcoEdge Pro. Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the EcoEdge Pro by pressing the Volume + button. If increasing the volume on the EcoEdge Pro and / or increasing the volume on your Bluetooth device does not work, the EcoEdge Pro may be in Power Save Mode.   User Manual Download our user manual to get a full understanding of our product.  

IP67 waterproof dustproof floating Bluetooth® speaker with compact, rugged styling and space for your smartphone. Featuring a booming 15W speaker, the EcoExtreme 2 has incredible sound in a portable package and is still tough enough for every outdoor adventure. Includes an EcoTalk button for Google and Siri voice activation. Tech Specs Features IP67 Waterproof, shock resistant, sand proof. It even floats! 491 cubic cm of waterproof dry storage for phone, key fob, and credit cards Big sound & long playtime packed into a slim, rugged, and portable package Integrated music controls: Volume, play/pause, FWD, and back buttons Built in microphone: provides speakerphone function, Siri / Ok Google integration Integrated rechargeable lithium battery: 15 hours of playtime Loud full range 15W Max speaker Walkie talkie feature integration with Zello app installed on your smartphone Bluetooth 5.0 streams audio wirelessly from your phone while inside the Extreme 2 or use it as a standalone speaker and stream audio from any Bluetooth enable device up to 30m (100 feet) away Size & Weight Length:  25.7cm Width:   14.0cm Height:   6.6cm Weight:   482g Input & Outputs USB-C Charging input jack Power Powered by Rechargeable Lithium Battery Battery size: 3200mAh battery, 3.7V FAQs Is the EcoExtreme 2 waterproof & can the EcoExtreme 2 be used in water? YES. The EcoExtreme 2 meets the IPX7 waterproof standard. The EcoExtreme 2 can be used in the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! Plus, the EcoExtreme 2 floats! (Be careful, the waterproof compartment must be closed properly to keep the EcoExtreme 2 watertight.) What is IPX7? The IPX7 Waterproof standard means that the product is protected against water immersion. ECOXGEAR tests all their products by submerging them in AT LEAST 3 feet of water. This means that our products, including the EcoExtreme 2 can withstand use in the water. Be careful of other products that claim to be waterproof but are only IPX5 or less. They will leak and sink to the bottom of the pool under the fun conditions above. Does the EcoExtreme 2 work with any Bluetooth enabled Device? The EcoExtreme 2 waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the EcoExtreme 2 be away from my Bluetooth device? The connectivity for the EcoExtreme 2 is designed and tested to far exceed 30 feet (up to 100ft) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the EcoExtreme 2. The EcoExtreme 2 will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your EcoExtreme 2 and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your EcoEdge+ . Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the EcoExtreme 2 by pressing the Volume + button. If increasing the volume on the EcoExtreme 2 and / or increasing the volume on your Bluetooth device does not work, the EcoExtreme 2 may be in Power Save Mode.   User Manual Download our user manual to get a full understanding of our product.  

The EcoLantern by ECOXGEAR is a lantern speaker for the outdoors that combines both the music and light needed for great outdoor activities. Either while camping or enjoying a backyard BBQ – this lantern speaker for the outdoors is functional and fun. It has a loud 360° sound speaker and a bright bi-directional lantern. Use at home or take it with you on your adventures; this lantern speaker for the outdoors has a waterproof and dustproof construction that is built to endure. Tech Specs Features IP67 Waterproof / Shock Resistant Shock Resistant, Submersible, & Floats 400 Lumen Wide Pattern White Lantern Light Up to 20 Hours of Play Time 5V USB Charge Out Port Music & Light Controls 5W Speaker with 360° Sound Bi-Directional Light Control Modes: White, Red, Party, and Emergency Integrated Bottle Opener Bluetooth 4.2 streams audio wirelessly from up to 100 feet away via your Smartphone, tablet or any Bluetooth enabled device. Size & Weight Width: 9.2cm Height: 26.4cm Weight: 737g Input & Outputs Micro USB charging input jack USB Type A device charge output jack Power Powered by Rechargeable Built-in Lithium Battery Includes rapid charge AC charge Adapter Battery size: 2200mAh, 7.4V Support Product Manual: EcoLantern User Guide - English CONTACT SUPPORT by email support@ecoxgear.com.au User Manual Download our user manual to get a full understanding of our product.  

Sol Jam Solar Charging IP67 Waterproof Dustproof Floating RGB Colour Music Sync LED Bluetooth Speaker. Powered by the sun. Yes, you can play music all day. The new Sol Jam speaker is a compact and loud waterproof Bluetooth speaker with integrated high-efficiency solar charging panel technology. Tech Specs     Features IP67 Certified Waterproof & Dustproof & Floats Rugged and Shock resistant design HD Solar: High Density solar panel keeps the battery charged. 7 RGB Party Lights Mode – White, White(Low), Green, Red, Blue, Music Sync, Colour Fade. Dual Speakers with 20W Peak Power & a large Subwoofer for enhanced bass. 12+ hours of playtime Solar Powerbank – Bult in USB port for recharging your phone or tablet EcoCast allows up to 50 speakers connect to any ECOXGEAR speaker with the EcoCast feature. Bluetooth 5.0 for long range reliable wireless connection to smartphone AUX-IN connection port to play audio from a wired device Includes carry lanyard and carabiner. Mounting Options via ¼-20 Camera mount screw point Size & Weight Width:     155mm Height:      79mm Depth:     127mm Weight:    711g Input & Outputs USB Type-C speaker charge jack USB Type A device charge jack 3.5mm AUX IN jack Power Powered by Rechargeable Built-in Lithium Battery Charging time approx. 4 hrs (Adapter) Solar charge rate varies with environmental conditions Includes USB Type-C to Type-A Cable 12+ hours from full charge at 75% volume level What's in the Box Sol Jam Unit Carabiner Clip USB Type-C Cable User Guide FAQs Is the SolJam waterproof & can the SolJam be used in water? YES. The SolJam meets the IPX7 waterproof standard. The SolJam can be used in the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! Plus, the SolJam floats! (Be careful, the charging cap must be closed properly to keep the SolJam watertight.) What is IPX7? The IPX7 Waterproof Standard means that the product is protected against water immersion. ECOXGEAR tests all their products by submerging them in AT LEAST 3 feet of water. This means that our products, including the SolJam can withstand use in the water. Be careful of other products that claim to be waterproof but are only IPX5 or less. They will leak and sink to the bottom of the pool under the fun conditions above. Will the solar panel on the SolJam keep the battery charged even while playing music? Yes, the solar panel will use energy from the sun to recharge the battery in the SolJam. The amount of charging achieved from the solar panel is dependent on a variety of factors: time of year, time of day, global location, cloud cover, and angle of the panel to the sun. We designed the SolJam solar panel to produce about 350mA of current in “good” sun conditions (middle of the day, no clouds, etc.), and the SolJam consumes about 300-400mA of current when playing at high volume…..so in these conditions, the solar panel will keep the SolJam battery charged while playing music. Please note that if you use the charge out port on the SolJam, it will use up to 1000mA of current, so the solar panel will not be able to keep up with this power drain and the battery level will drop (but the solar power in will slow down how fast the battery drains). Does the solar panel on the SolJam recharge the battery even when off? The SoundExtreme waterproof Subwoofer connects to any other brand of device through the use of the aux in jack. How far can the SoundExtreme be away from soundbar? The SolJam solar charging circuit will remain on and charging the battery as long as the master power switch is ON. The unit can be in STANDBY mode (master power switch on, but unit in standby mode). Of course, the solar charging only works when the unit is in direct sunlight. Does the SolJam work with any Bluetooth enabled Device? The SolJam waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the SolJam be away from my Bluetooth device? The connectivity for the SolJam is designed and tested to exceed 30 feet from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. Of course none of these distractions are outside. Can you hear the music underwater? You can play the unit under water. But of course unless you are dolphin, you will not be able to clearly make out the audio. Although you can hear music underwater, the SolJam was not made for the purpose of listening to music underwater. The quality of the sound will be best heard if above water. Does the SolJam require any additional hardware for the speakerphone feature? No additional hardware is needed to use the speakerphone on the SolJam. When your smartphone is paired with the SolJam, you will hear the phone call ring thru the speaker. Simply press the PHONE button on top of the SolJam to answer the call. Does the SolJam need any batteries? No, the SolJam comes with a built in Lithium Ion rechargeable battery. You will get over 10 hours of playtime on a single charge. It usually takes 2.5 hours to fully recharge from a low battery state. User Manual Download our user manual to get a full understanding of our product.  

The ECOXGEAR Wired Dynamic Microphone is designed to be used with the ECOXGEAR range of speakers including the EcoBoulder Max, EcoBoulder+, EcoTrek, and EcoXplorer.  The Wired Dynamic Microphone is the perfect accessory for karaoke, street performance, school, sporting events, real estate auctions, and a variety of public announcements. With the ECOXGEARWired Dynamic Microphone every day is a party!     Size & Weight Cable Length:  3.0m Mic Height:     20cm 1/4" Aux Jack User Manual Download our user manual to get a full understanding of our product.  

The EcoBoulder Max Bluetooth Speaker is 100% waterproof, submersible, and even floats. Let it sit outside in the rain or snow or drop it in a river - it keeps on playing. The EcoBoulder Max wirelessly connects via Bluetooth to your smartphone, tablet, or laptop with up to 30m of range. A simple touch of the EcoTalk button activates the built-in microphone connecting you with Siri or ok Google voice assistants. Includes AUX in & USB charge port, AM/FM radio with 5 presets. Up to 50 hours of Playtime/100 Hours Standby. Wirelessly connect up to 50 EcoBoulder Max's with EcoCast. Tech Specs     Features 100% waterproof and dustproof. Meets IP67 international waterproof and dustproof standards. Drop the EcoBoulder Max in your pool, lake or ocean, no worries – it floats. 120-watts dynamic power amplifier for massive sound. Tune the audio output to match your listening preference with 5 preset equalizer sound profiles. 3-way speaker system w/ 8” full range main driver + 3” Tweeter + Oval passive subwoofer Integrated microphone jack 1/4" (6.35 mm) for an external microphonefor PA or karaoke. (External microphone not included.) Includes 1/8” (3.5mm) auxiliary audio input jack to play from any wired audio source. Digital AM/FM radio and save up to 5 of your favorite stations to 1 press presets. ECOTALK: Microphone built in for Siri & Google support and speakerphone capability. 5V, 2.1A USB port for fast portable device charging. Back-lit buttons and large LED display for night viewing. Oversized rugged wheels and telescoping handle for easy transport. Play on standard AC wall power for continuous play. When using the integrated rechargeable battery you can enjoy up to 50+ hours of playtime at typical listening levels (10+ hours at max volume levels and up to 100 hours on standby or very low volume levels). Bluetooth 5.0 streams audio wirelessly from up to 30m (100 feet) away via your Smartphone, tablet or any Bluetooth enabled device. Size & Weight Length:  29.2cm Width:   39.8cm Height:  48.3cm Weight:  12.2kg Input & Outputs 5V USB out 2.1 A 110-230V, 50-60Hz AC IN Aux In (3.5mm) External Mic Jack 1/4" (6.35 mm) Qi Wireless Charging Pad Power SLA Rechargeable Battery Up to 50 hours playtime at normal volume levels. Fully re-charges in 7-8 hours. FAQs Is the EcoBoulder Max waterproof & can the EcoBoulder Max be used in water? YES. The EcoBoulder Max meets the IPX7 waterproof standard. The EcoBoulder Max can be used in the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! Plus, the EcoBoulder Max floats! (Be careful, the charging caps and waterproof compartment must be closed properly to keep the EcoBoulder Max watertight.) What is IPX7? The IPX7 Waterproof Standard means that the product is protected against water immersion. ECOXGEAR tests all their products by submerging them in AT LEAST 3 feet of water. This means that our products, including the EcoBoulder Max can withstand use in the water. Be careful of other products that claim to be waterproof but are only IPX5 or less. They will leak and sink to the bottom of the pool under the fun conditions above. Does the EcoBoulder Max work with any Bluetooth enabled Device? The EcoBoulder Max waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the EcoBoulder Max be away from my Bluetooth device? The connectivity for the EcoBoulder+ is designed and tested to far exceed 30 feet (up to 100ft) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the EcoBoulder Max. The EcoBoulder Max will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your EcoBoulder Max and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your EcoBoulder Max. I plugged in a microphone into the MIC port on the EcoBoulder Max and it is not working? The MIC port on the EcoBoulder Max is for use with dynamic microphones only (please check to ensure the microphone you are using is dynamic and not condenser type). The AM/FM reception is poor, how can I improve it? To adjust AM/FM reception, move entire product. To improve FM reception, do not use USB charging ports and unplug from AC power. Water is draining from bottom of unit, should I be concerned? Holes in the base of the EcoBoulder Max speaker are designed to allow excess water run-off to drain away from the speaker. Water draining from this area is normal and safe. Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the EcoBoulder Max by pressing the Volume + button. If increasing the volume on theEcoBoulder Max and / or increasing the volume on your Bluetooth device does not work, the EcoBoulder Max may be in Power Save Mode. Which is the best party speaker? If you’re looking for the best party speakers in Australia, you’ll want a waterproof party speaker with plenty of modern features like good battery life, support from the latest version of Bluetooth, and a sturdy, portable design so that you can take it with you anywhere you go. A great party speaker will give you great quality audio and a booming sound that’ll light up any outdoor party! How many watts is loud enough for a party? If you’re going to start a raving party, you’ll want your speakers to be as loud as possible! Wattage, however, is not a good indicator of how loud the party speaker will be, it’s simply there to tell you how much power it can handle. For example, a 200W speaker could be as loud as a 500W one. That being said, the best party speakers in Australia should be more than loud enough for a party. What is the loudest party speaker? The loudest speaker we have is none other than the EcoBoulder+. This is a waterproof party speaker and it offers a booming sound which is great for any outdoor party!  This speaker also features EcoConnect, which allows it to pair up with other speakers, giving you a louder stereo sound.  This is one of the best party speakers we have and you’ll be the envy of any party-goer when you have one of these! What should I look for when buying a party speaker? A modern party speaker does more than just play music—they have a wide array of features to boot. Here’s what you need to look out for when buying one: Portability The speaker should be easy to carry around and strong and durable enough to be taken everywhere, like the beach. Sound quality Sound quality is extremely important for any speaker. The perfect party speaker should have crisp and clear audio, and be loud enough for a party of at least 50 people. How can you check the quality of a speaker? Check the sound quality Play some music on the speaker and check how it handles the sounds of different instruments. A good quality speaker will let you hear small details that you never heard before in a song, like background instruments. Crackly noises are a sign that the speaker is of poor quality. Check the build quality Give the speaker a light tap. If it sounds hollow, the audio quality, let alone the durability, might not be very good. A good speaker should feel solid. Check the water/dustproof rating Make sure the speaker has a water/dustproof rating of at least IP68. How do I choose a party speaker? Choosing the right party speaker depends on what you’re expecting from it and what you’ll be using it for. Here are a few questions you need to ask yourself: How often will I use it? Where will I be taking it? What other features do I want aside from sound quality? Do I want to use it at home too? How long do I want to play music? Once you’ve painted a picture of what you truly want, you’ll be on your way to picking out the ideal speaker User Manual Download our user manual to get a full understanding of our product.  

RF remote control for the ECOXGEAR SOUNDEXTREME. Prior to using the RF remote the 1st time you pairing the remote to the SOUNDEXTREME is required. Pairing instructions included.

2.5M Cigarette Lighter Power Cable for the ECOXGEAR SoundExtreme. Quick disconnect SAE connector for easy connecting and disconnecting. Compatible with: SOUNDEXTREME SE18, SE26, and SEDS32 Size & Weight Length:  250mm Height:  45mm Depth:  10mm Weight:  130g

3M Extension Power Cable for the ECOXGEAR SoundExtreme. Quick disconnect SAE connector for easy connecting and disconnecting  Compatible with: SOUNDEXTREME SE18, SE26, and SEDS32 Size & Weight Length:  300mm Height:  45mm Depth:  10mm Weight:  100g

 Version 3 of our mounting bracket.  Circular brackets mount to outside of the Sound Exreme speaker allowing for 360 degrees of rotation.If you want to give your SoundExtreme soundbar mounts a little upgrade, then this set of circular mounting brackets is just what you need.  Like any mounting bracket, these circular mounting brackets let you attach your soundbar to any vehicle, such as ATVs, speed boats, powersports vehicles and much more. Unlike other mounting brackets, however, these allow you to turn your soundbar 360 degrees! With these mounting brackets, you can orient your SoundExtreme soundbar in different ways; you can turn them forwards so you can listen to music at full blast at outdoor parties when your vehicle is parked or turn the soundbar towards the inside of your vehicle to listen to your favourite jams as you ride with your friends! These brackets are extremely durable and built to keep your soundbar stable when driving on the rockiest of roads and it’s easy to install and remove, so you can attach it wherever you want in your vehicle. The brackets will keep your soundbars safe from damage and make sure driving on rough terrain won’t affect your music. They’re made to last a long time and they make a great accessory for your soundbar. These mounts are compatible with the SoundExtreme 26’’, SoundExtreme 18”, SoundExtreme SEB 26”, and SoundExtreme SEDS 32”. This set comes with : Circular mounting brackets Rubber pads 2 sets of hose clamps (Medium and Large) Assorted screws of variable lengths, washers and bolts  12v power cable  Please Note:  All SoundExtreme's come with the V3 bracket included in the box.  This V3 bracket is offered as an additional item if you might want to install your speaker in multiple locations.

Version 1 of our mounting bracket.  Right Angle brackets mount to the top of the Sound Extreme speaker using 1/4 20 mounting screws.If you want to take your music with you wherever you go, what better way to do this than by mounting your sound system to your vehicle? With our SoundExtreme mounting bracket kit, you can install your SoundExtreme speaker on any powersports vehicle, ATV, golf cart and speed boat!  These mount brackets are made from high-quality materials, guaranteeing strong support for your SoundExtreme soundbar. They’re designed to keep your speakers steady when you’re driving through the roughest of terrains in the Australian outback or sailing on the stormiest seas, keeping your soundbar safe from damage and making sure that your music goes uninterrupted.  The brackets are also easy to remove and install, so you can quickly install your soundbar onto another vehicle and due to their durability, you can use these brackets for a long time and on many vehicles.  Thanks to their versatility, these mount brackets can be used to install your speakers on the vehicle’s canopy or dashboard, whichever place is convenient for you.    The brackets are compatible with a range of our SoundExtreme soundbars including the SoundExtreme 26’’, SoundExtreme 18”, SoundExtreme SEB 26”, and SoundExtreme SEDS 32”. The set Includes: Right Angle mounting brackets Rubber pads 2 sets of hose clamps (Medium and Large) to accommodate different soundbar sizes Assorted screws of variable lengths, washers and bolts  12v power cable  Please Note:  All SoundExtreme's come with the V3 bracket included in the box.  This V1 bracket is offered as an additional item if your custom installation would need this type of mounting configuration. If you want to custom install your SoundExtreme soundbar, then this mounting bracket kit is a great accessory to have!

Enjoy your ECOXGEAR Extreme Subwoofer ES08 on your favourite Powersports vehicle and by your pool, backyard patio and workshop with this convenient AC/DC 30 amp power adapter. The EC5 power quick connector is a home power supply that easily connects and disconnects your Extreme Subwoofer ES08 for fun anywhere in and around your home.   COMPATIBLE WITH: Extreme Subwoofer ES08 Size & Weight   Total Cable Length: Power Cable Length 0.95m / EC5 Cable Length 2.0m  Width:          24.8cm Height:           4.0cm Depth:            8.0cm Weight:          1.76kg User Manual Check out our full product range spec sheet  

Enjoy your ECOXGEAR SoundExtreme Soundbar on your favourite Powersports vehicle and by your pool, backyard patio and workshop with this convenient AC/DC 10 amp power adapter. The SAE power quick connector is a home power supply that easily connects and disconnects your SoundExtreme for fun anywhere in and around your home.  This SoundExtreme home power supply plugs into any standard 220-240-volt electrical outlet.  This adapter is for home use only. Keep away from water.  COMPATIBLE WITH: SOUNDEXTREME SE18, SE26, SEDS32 Size & Weight   Total Length (Power Adapter + Cords):  2.6m Width:         5.7cm Hight:          13.7cm Depth:          3.8cm Weight:        800g User Manual Download our user manual to get a full understanding of our product.  

The SoundExtreme ES08 is a 500 watt peak powered 8” active subwoofer providing the ultimate kick in bass for your ride! 100% waterproof and dustproof (IP66) enclosure is optimized for harsh environments from the heat of desert to salty sea air. ECOXGEAR ExtremeSubs are designed with all the connections to be “plug & play” with any brand soundbar and automatically connect to ECOXGEAR SoundExtreme soundbars via our proprietary wireless ECOCAST protocol. Tech Specs     Features 500 watts of peak (250w RMS) power output with variable bass gain and adjustable low pass crossover Marine-grade speakers in IP66 Patent Pending enclosure providing 100% waterproof, dirt proof and dustproof audio Wireless Audio Connection – wirelessly connect to ECOXGEAR soundbars/speakers with ECOCAST Wired Audio Connection - connect to any soundbar, amplifier, or stereo’s aux out or sub output jacks Auto power on modes – remote (blue wire), audio or DC Wired Remote Gain Switch - quickly adjust the sub volume on the fly. Multi-Color LED Backlit Speakers – solid green, red, white, blue, or music sync, fading or off. Mounting brackets and integrated threaded mounting holes for multiple mounting configuration options Protected under patent US 9,307,307 , 11,223,886 , D937244 Size & Weight Depth:   23.2cm Width:   35.2cm(41.0cm with Mount) Height:  22.8cm(24.6cm with Mount) Weight:  7.65Kg Input & Outputs Blue wire acc cable auxiliary audio in cable remote gain control cable Power Input Voltage: 12VDC, 30A(requires connection to external DC battery for power) What's in the Box Video FAQs Is the SoundExtreme waterproof & can the SoundExtreme be used over/near water? YES. The SoundExtreme meets the IPX6 waterproof standard. The SoundExtreme is impervious to rain and can be sprayed with a water hose without issues. Batten down the hatches and play your tunes worry free! What is IPX6? The IPX6 Waterproof Standard means that the product is protected against strong water jets. This means that IPX6 products, including the SoundExtreme can withstand use around water. How does the SoundExtreme Subwoofer connect with other ECOXGEAR SoundExtreme speakers? The SoundExtreme Subwoofer connects to other SoundExtreme soundbars via EcoCast wireless connectivity. Any ECOXGEAR speaker with ECOCAST is compatible. Does the SoundExtreme work with other brands of soundbars or Stereo head units? The SoundExtreme waterproof Subwoofer connects to any other brand of device through the use of the aux in jack. How far can the SoundExtreme be away from soundbar? The connectivity for the SoundExtreme Subwoofer is designed and tested to far exceed 9M from your Bluetooth device. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the SoundExtreme What is Peak and RMS output of the SoundExtreme? 500W Peak / 250W RMS How much current does the SoundExtreme Subwoofer draw? 27 Amps at max volume depending on the type of music being played (running at 12V) It is recommended that you install the ES08 subwoofer with a 30 amp rated 12V step down converter similar to this model https://tinyurl.com/z779kd7t. The SoundExtreme will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your SoundExtreme and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your SoundExtreme Volume level is low when playing, how do I make it louder? Increase the gain level to the maximum and the crossover to 275hz. Additionally, if using the wired remote gain control make sure the gain is maximum. I am having intermittent issues with the SoundExtreme not connecting correctly to my smartphone via Bluetooth. The Bluetooth module and microcontroller within the SoundExtreme sound bar has a “boot-up” and “power-down” sequence that the unit goes through when turned on and off respectively. This process takes several seconds (~3-5 seconds) to complete. If the SoundExtreme is on and 12V supply power is cut off from the speaker and then quickly power is returned to the speaker, it may cause the SoundExtreme to get stuck in the “boot-up” mode when you turn the SoundExtreme back on again. The best way to reset the SoundExtreme unit to normal function is to unplug the SoundExtreme from the 12V power supply (i.e. battery) for ~10 seconds and then plug it back in. After this, the SoundExtreme should work properly when turned on again. Installation Note: If the So undExtreme is connected to the accessory junction box (busbar) and the power wire of the SoundExtreme is connected to the 12V ACC power post (this receives power only when the key is ON) on the busbar, then you may find that the above discussed “boot-up” issue may occur with your SoundExtreme (because turning the ignition key cuts off and restores power to the ACC power post). We suggest that you do not hook the SoundExtreme power to ACC power, but to direct 12V battery power. If you are concerned with battery drain issues from having accessories directly attached to the battery, you can add a “kill switch” in-line between the SoundExtreme and the battery so that you can cut power to the SoundExtreme when the vehicle is not in use. Can the SoundExtreme be set up to automatically power on when my vehicle is turned on? Yes, you can use the optional bluewire and connect it to a switch or your ignition. Next, Turn the Auto-Turn-On Switch to select “Remote” on the back of the subwoofer. How do I mount my SoundExtreme on my vehicle? SoundExtreme includes various mounting brackets and accessories. Utilizing the mounts allows users to mount to vehicle in various ways: Use mounting brackets and provided screws to mount to vehicle cross bar by drilling holes in cross bar (or other mounting surface…ie vehicle roof, etc.) and using provided screws to bolt mounting brackets onto cross bar Drill hole through cross bar and use provided screws to secure SoundExtreme to cross bar by screwing directly into top mount rail threaded holes on SoundExtreme Use mounting brackets and provided worm clamps to secure the SoundExtreme onto a cross bar (without needing to drill holes in cross bar) Purchase other after-market accessory mounts that are compatible with the SoundExtreme brackets to mount as you see fit. You can find many compatible mount tube/pipe mount options online and Amazon by searching ‘ Universal cage tube clamp mount User Manual Download our user manual to get a full understanding of our product.  

The TRUE WIRELESS SoundExtreme SEB 26 has all the features of the original SE26.  Now with Long-lasting Lithium-Ion battery pack.  Easy install, no longer need to connect to the 12v battery source. The Powersports sound bar and LED lighting system is perfect for your 4WD, ATV/UTV, boat, and golf cart. 100% waterproof, dustproof, and dirtproof. 500 watts of power to 8 marine grade speakers provide a great listening experience. With our EcoCast feature connect up to 50 Sound Extremes at a time!  Patent Pending.          Tech Specs Features Marine-grade speakers in IP66 Patent Pending enclosure providing 100% waterproof, dirt proof and dustproof audio 500 watts of peak power output 8 marine grade speakers: 2 tweeters, 4 mid-range and 2 side mounted woofers Battery provides 20+ Hours of Playtime at typical volume levels Dedicated Battery Charger 12 volts / 2 amps Play time of 20 hours at normal volume, 7 hours at 75% volume Two internal independently sealed cavities for true left and right stereo sound Bluetooth 5.0 for long range reliable wireless connection to smartphone EcoCast allows up to 100 soundbars to be connected together or connect to any ECOXGEAR speaker with the EcoCast feature. Integrated on speaker controls: Power, mode (Bluetooth/FM/Aux in), volume, skip FWD/Back, Ecocast, lights, Bluetooth Built in microphone for speakerphone calls. Multi-color LED’s backlight all 8 speakers: chose from red, green, blue, white. Sync to music, solid color on or off. Rear Facing dual 160 Lumen LED light bar can be turned on separately from the speaker LED’s. LED light bar can be white, red or yellow. Waterproof Aux In connection port to play audio from a wired device Waterproof Aux out jack to daisy chain to other optional wired speakers Waterproof 5V USB charge out to give a boost to your phone or other devices Mounting brackets and integrated threaded mounting holes for multiple mounting configuration options Protected under patent US 9,307,307 B2 and several patents pending Size & Weight Length:    64.8cm Width:     11.4cm (17.1cm with Battery Installed) Height:    11.4cm (14.6cm with Mount) Weight:    6.0Kg Input & Outputs 5V USB out 2.1 A auxiliary audio in cable audio out cable Power Battery Pack 11.1V, 13.4Ah Battery Cells 12x 18650 Li-Ion Cells 40 amp Hours Battery charger 12 volts / 2 amps Play time: 20 hours at normal volume, 6.75 hours at 75% and 4 hours at Maximum volume) What's in the Box Warning: Remote Control includes a button battery. Video FAQs  Is the SoundExtreme waterproof & can the SoundExtreme be used over/near water? YES. The SoundExtreme meets the IPX6 waterproof standard. The SoundExtreme can be used by the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! What is IPX6? The IPX6 Waterproof Standard means that the product is protected against strong water jets. This means that IPX6 products, including the SoundExtreme can withstand use around water. Does the SoundExtreme work with any Bluetooth enabled Device? The SoundExtreme waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the SoundExtreme be away from my Bluetooth device? The connectivity for the SoundExtreme is designed and tested to far exceed 30 feet (up to 100ft) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the SoundExtreme The SoundExtreme will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your SoundExtreme and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your SoundExtreme Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the SoundExtreme by pressing the Volume + button. If increasing the volume on the SoundExtreme and / or increasing the volume on your Bluetooth device does not work, the SoundExtreme may be in Power Save Mode. How can I improve the audio from my soundbar? We make the best soundbars in Australia but did you know you can make them sound even better? Here’s how: Use HDMI cables to send audio signals to your soundbar. If you’re connecting it to your TV, turn off your TV’s built-in speakers. If you’re going to fit the soundbar onto an ATV or any other vehicle, fix it to the front of your vehicle, close to the steering wheel or handlebars for better sound. What is a good quality soundbar? If you’re looking for the best soundbars in Australia, there are a few features you need to look for: High-quality materials: Good quality soundbars are made from tough materials that can last a long time. Wireless connectivity : The soundbar should be able to connect to both Bluetooth and Wi-Fi. Ruggedness: Nothing says quality and best soundbar in Australia like a soundbar that’s mudproof, waterproof and dustproof! How much should you spend on a soundbar? Looking for good soundbar deals in Australia can be hard and some of them can be expensive. A good quality soundbar that has a great build and sound should cost a little under $900; however, prices may be higher depending on product features. Are soundbars with built-in subwoofers good? Yes, they are! With built-in subwoofers, you can have the booming sound of a subwoofer without having to connect one to your soundbar. This is especially great when your soundbar is designed to be used outdoors; the subwoofer can make any beach or pool party feel like a live concert—this may be one of the best soundbar deals in Australia! Is a soundbar better than a speaker? Soundbars can prove to be a better alternative to regular speakers in a few ways: They already have multiple speakers built-in. They can give you a surround sound experience without additional speakers. They’re all-in-one devices, sporting an amplifier and other important components. Their slim design makes them easy to pack. They can connect with many other speakers. They’re easy to fit onto a vehicle. Is the SoundExtreme SEB26 waterproof & can the SoundExtreme be used over/near water? YES. The SoundExtreme SEB26 meets the IPX6 waterproof standard. It is important not to get the Battery Pack wet. The SoundExtreme can be used near the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! Do not submerge the SEB 26 in water. What is IPX6? The IPX6 Waterproof Standard means that the product is protected against strong water jets. This means that IPX6 products, including the SoundExtreme can withstand use around water. Does the SoundExtreme work with any Bluetooth enabled Device? The SoundExtreme waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the SoundExtreme be away from my Bluetooth device? The connectivity for the SoundExtreme is designed and tested to far exceed 30 feet (up to 100ft) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the SoundExtreme Can I power a 12V accessory (light bar, etc.) using the Auxiliary Power Out connector on the SoundExtreme? No, the SEB26 does not support daisy chaining additional 12 volt devices. How many Lumens is the light bar on the back of the SoundExtreme? 280 Lumens What is Peak and RMS output of the SoundExtreme SEB26? 500W Peak / 50W RMS How much current does the SoundExtreme SEB26 draw? 3-5 Amps at max volume depending on the type of music being played (running at 12V) The SoundExtreme SEB26 will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your SoundExtreme and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your SoundExtreme Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the SoundExtreme SEB26 by pressing the Volume + button. If increasing the volume on the SoundExtreme SEB26 and / or increasing the volume on your Bluetooth device does not work, the SoundExtreme SEB26 may be in Power Save Mode. I am having intermittent issues with the SoundExtreme SEB26 not connecting correctly to my smartphone via Bluetooth. The Bluetooth module and microcontroller within the SoundExtreme SEB26 sound bar has a “boot-up” and “power-down” sequence that the unit goes through when turned on and off respectively. This process takes several seconds (~3-5 seconds) to complete. If the SoundExtreme SEB26 is on and 12V supply power is cut off from the speaker and then quickly power is returned to the speaker, it may cause the SoundExtreme SEB26 to get stuck in the “boot-up” mode when you turn the SoundExtreme SEB26 back on again. The best way to reset the SoundExtreme SEB26 unit to normal function is to unplug the SoundExtreme SEB26 from the 12V power supply (i.e. battery) for ~10 seconds and then plug it back in. After this, the SoundExtreme should work properly when turned on again. Can the SoundExtreme SEB26 be set up to automatically power on when my vehicle is turned on? No, the SoundExtreme SEB26 will enter “sleep mode” . you must turn the speaker fully ON by either pressing the POWER button on the SoundExtreme SEB26 or on the remote provided with the SoundExtreme SEB26. How do I mount my SoundExtreme on my vehicle? SoundExtreme includes various mounting brackets and accessories. Utilizing the mounts allows users to mount to vehicle in various ways: Use mounting brackets and provided screws to mount to vehicle cross bar by drilling holes in cross bar (or other mounting surface…ie vehicle roof, etc.) and using provided screws to bolt mounting brackets onto cross bar. Drill hole through cross bar and use provided screws to secure SoundExtreme to cross bar by screwing directly into top mount rail threaded holes on SoundExtreme. Use mounting brackets and provided worm clamps to secure the SoundExtreme onto a cross bar (without needing to drill holes in cross bar). Purchase other after-market accessory mounts that are compatible with the SoundExtreme brackets to mount as you see fit. You can find many compatible mount tube/pipe mount options online and Amazon by searching ‘ Universal cage tube clamp mount’. How do I connect two SoundExtreme units to play audio together? Two or more SoundExtreme units can be synced to play audio together in two ways:1. Wired: Connect 3.5mm audio cable from first SoundExtreme AUX OUT to AUX IN on second SoundExtreme unit. (both units must be powered on individually)2. Wireless: Use EcoCast feature on SoundExtreme to wirelessly pair two or more SoundExtreme units - see user guide for full instructions. (both units must be powered on individually) User Manual Download our user manual to get a full understanding of our product.  

The new 32" SoundExtreme powersports sound bar with 360 degrees sound and LED lighting system is perfect for your 4WD, ATV/UTV, boat, and golf cart. 100% waterproof, dustproof, and dirtproof. 500 watts of power to 11 marine grade speakers provide a great listening experience.With our EcoCast feature connect up to 100 Sound Extremes at a time!  Patent Pending.      Tech Specs Features Marine-grade speakers in IP66 Patent Pending enclosure providing 100% waterproof, dirt proof and dustproof audio 500 watts of peak power output 11 marine grade speakers: 3 tweeters, 6 mid-range and 2 side mounted woofers The new double-sided soundbar provides the same front-facing audio as the class-leading SE26 soundbar while adding three rear speakers for 360-degree sound. Bluetooth 5.0 for long range reliable wireless connection to smartphone EcoCast allows up to 100 soundbars to be connected together or connect to any ECOXGEAR speaker with the EcoCast feature. Integrated on speaker controls: Power, mode (Bluetooth/FM/Aux in), volume, skip FWD/Back, Ecocast, lights, Bluetooth Built in microphone for speakerphone calls. Multi-color LED’s backlight all 8 speakers: chose from red, green, blue, white. Sync to music, solid color on or off. Rear Facing dual 160 Lumen LED light bar can be turned on separately from the speaker LED’s. LED light bar can be white, red or yellow. Waterproof Aux In connection port to play audio from a wired device Waterproof Aux out jack to daisy chain to other optional wired speakers Waterproof 5V USB charge out to give a boost to your phone or other devices Mounting brackets and integrated threaded mounting holes for multiple mounting configuration options Warning: The remote control includes a button battery. Protected under patent US 9,307,307 B2 and several patents pending Size & Weight Length:    81.3cm Width:     11.4cm Height:    11.4cm (14.6cm with Mount) Weight:    6.3Kg Input & Outputs 5V USB out 2.1 A auxiliary audio in cable audio out cable Power Input Voltage: 12VDC, 10A (requires connection to external DC battery for power) Output Voltage for daisy chaining additional speakers: 12VDC, 10A FAQs Is the SoundExtreme waterproof & can the SoundExtreme be used over/near water? YES . The SoundExtreme meets the IPX6 waterproof standard. The SoundExtreme can be used by the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! What is IPX6? The IPX6 Waterproof Standard means that the product is protected against strong water jets. This means that IPX6 products, including the SoundExtreme can withstand use around water. Does the SoundExtreme work with any Bluetooth enabled Device? The SoundExtreme waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the SoundExtreme be away from my Bluetooth device? The connectivity for the SoundExtreme is designed and tested to far exceed 30 feet (up to 100ft) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the SoundExtreme Can I power a 12V accessory (light bar, etc.) using the Auxiliary Power Out connector on the SoundExtreme? Yes, you can run a light bar or other accessory through the auxiliary wires coming out of the SoundExtreme. The light needs to accept 12V power and should drawless than ~10A current. You must turn on the accessory powered through the SoundExtreme separately from powering on the SoundExtreme, but it is easy to do. Here are the two ways to turn on the power to the accessory connected to the SoundExtreme auxiliary wires:1. On the SoundExtreme button pad, press and hold the Light Bar button for 3 seconds to enable / disable Accessory Mode (which turns on / off the Auxiliary Power Out connection).2. On the remote control, press the “Acc” remote switch button to turn on / off the Auxiliary Power Out connectionAfter using one of the above methods to turn on / off the auxiliary power, the speaker will announce, “Accessory mode enabled” or “Accessory mode disabled.” How many Lumens is the light bar on the back of the SoundExtreme? 280 Lumens What is Peak and RMS output of the SoundExtreme? 500W Peak / 50W RMS How much current does the SoundExtreme draw? 3-5 Amps at max volume depending on the type of music being played (running at 12V) The SoundExtreme will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your SoundExtreme and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your SoundExtreme Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the SoundExtreme by pressing the Volume + button. If increasing the volume on the SoundExtreme and / or increasing the volume on your Bluetooth device does not work, the SoundExtreme may be in Power Save Mode. I am having intermittent issues with the SoundExtreme not connecting correctly to my smartphone via Bluetooth. The Bluetooth module and microcontroller within the SoundExtreme sound bar has a “boot-up” and “power-down” sequence that the unit goes through when turned on and off respectively. This process takes several seconds (~3-5 seconds) to complete. If the SoundExtreme is on and 12V supply power is cut off from the speaker and then quickly power is returned to the speaker, it may cause the SoundExtreme to get stuck in the “boot-up” mode when you turn the SoundExtreme back on again. The best way to reset the SoundExtreme unit to normal function is to unplug the SoundExtreme from the 12V power supply (i.e. battery) for ~10 seconds and then plug it back in. After this, the SoundExtreme should work properly when turned on again.Installation Note: If the SoundExtreme is connected to the accessory junction box (busbar) and the power wire of the SoundExtreme is connected to the 12V ACC power post (this receives power only when the key is ON) on the busbar, then you may find that the above discussed “boot-up” issue may occur with your SoundExtreme (because turning the ignition key cuts off and restores power to the ACC power post).We suggest that you do not hook the SoundExtreme power to ACC power, but to direct 12V battery power. If you are concerned with battery drain issues from having accessories directly attached to the battery, you can add a “kill switch” in-line between the SoundExtreme and the battery so that you can cut power to the SoundExtreme when the vehicle is not in use. Can the SoundExtreme be set up to automatically power on when my vehicle is turned on? No, the SoundExtreme will enter “sleep mode” when it is connected to 12V input power, so you must turn the speaker fully ON by either pressing the POWER button on the SoundExtreme or on the remote provided with the SoundExtreme. How do I mount my SoundExtreme on my vehicle? SoundExtreme includes various mounting brackets and accessories. Utilizing the mounts allows users to mount to vehicle in various ways: Use mounting brackets and provided screws to mount to vehicle cross bar by drilling holes in cross bar (or other mounting surface…ie vehicle roof, etc.) and using provided screws to bolt mounting brackets onto cross bar. Drill hole through cross bar and use provided screws to secure SoundExtreme to cross bar by screwing directly into top mount rail threaded holes on SoundExtreme. Use mounting brackets and provided worm clamps to secure the SoundExtreme onto a cross bar (without needing to drill holes in cross bar). Purchase other after-market accessory mounts that are compatible with the SoundExtreme brackets to mount as you see fit. You can find many compatible mount tube/pipe mount options online and Amazon by searching ‘ Universal cage tube clamp mount’. How do I connect two SoundExtreme units to play audio together? Two or more SoundExtreme units can be synced to play audio together in two ways:1. Wired: Connect 3.5mm audio cable from first SoundExtreme AUX OUT to AUX IN on second SoundExtreme unit. (both units must be powered on individually)2. Wireless: Use EcoCast feature on SoundExtreme to wirelessly pair two or more SoundExtreme units - see user guide for full instructions. (both units must be powered on individually)   User Manual Download our user manual to get a full understanding of our product.  

The SoundExtreme - SE18 by ECOXGEAR is a 45.7cm long waterproof, and dustproof, amplified Bluetooth speaker. This compact soundbar includes your favourite features from its bigger siblings while maintaining a full, rich sound. Mount it to Canopies, Trays, ATV, SxS, UTV, golf carts, boats and other recreational vehicles plus add colour to your music with the multi-mode party lights.    Tech Specs Features Marine-grade speakers in IP66 Patent Pending enclosure providing 100% waterproof, dirt proof and dustproof audio 300 watts of peak power output 5 marine grade speakers: 1 tweeter, 2 mid-range and 2 side mounted woofers Two internal independently sealed cavities for true left and right stereo sound Bluetooth 5.0 for long range reliable wireless connection to smartphone EcoCast allows up to 50 soundbars to be connected together or connect to any ECOXGEAR speaker with the EcoCast feature. Integrated on speaker controls: Power, mode (Bluetooth/FM/Aux in), volume, skip FWD/Back, Ecocast, lights, Bluetooth Built in microphone for speakerphone calls. Multi-color LED’s backlight all 8 speakers: chose from red, green, white. Sync to music, solid color on or off. Rear Facing 160 Lumen LED light bar can be turned on separately from the speaker LED’s. LED light bar has 5 light modes; Red Light, Yellow Light, White Light (high), White Light (Mid), White Light (low). Waterproof 12V auxiliary power out connection cables to connect to your vehicle’s battery Waterproof Aux In connection port to play audio from a wired device Waterproof Aux out jack to daisy chain to other optional wired speakers Waterproof 5V USB charge out to give a boost to your phone or other devices Mounting brackets and integrated threaded mounting holes for multiple mounting configuration options Long range RF remote control controls, lights, and audio functions. Protected under patent US 9,307,307 B2 and several patents pending Size & Weight Width:     45.7cm Height:    11.4cm (14.6cm with Mount) Depth:     11.4cm Weight:    3.8Kg Input & Outputs 5V USB out 2.1 A auxiliary audio in cable audio out cable Power Input Voltage: 12VDC, 10A (requires connection to external DC battery for power) Output Voltage for daisy chaining additional speakers: 12VDC, 10A What's in the Box   Warning: Remote Control includes a button battery.   Video FAQs Is the SoundExtreme waterproof & can the SoundExtreme be used over/near water? YES. The SoundExtreme meets the IPX6 waterproof standard. The SoundExtreme can be used by the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! What is IPX6? The IPX6 Waterproof Standard means that the product is protected against strong water jets. This means that IPX6 products, including the SoundExtreme can withstand use around water. Does the SoundExtreme work with any Bluetooth enabled Device? The SoundExtreme waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the SoundExtreme be away from my Bluetooth device? The connectivity for the SoundExtreme is designed and tested to far exceed 30m (up to 100ft) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the SoundExtreme The SoundExtreme will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your SoundExtreme and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your SoundExtreme Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the SoundExtreme by pressing the Volume + button. If increasing the volume on the SoundExtreme and / or increasing the volume on your Bluetooth device does not work, the SoundExtreme may be in Power Save Mode. How can I improve the audio from my soundbar? We make the best soundbars in Australia but did you know you can make them sound even better? Here’s how: Use 3.5mm Audio cables to send audio signals to your soundbar. If you’re connecting it to your TV, turn off your TV’s built-in speakers. If you’re going to fit the soundbar onto an ATV or any other vehicle, fix it to the front of your vehicle, close to the steering wheel or handlebars for better sound. What is a good quality soundbar? If you’re looking for the best soundbars in Australia, there are a few features you need to look for: High-quality materials: Good quality soundbars are made from tough materials that can last a long time. Wireless connectivity: The soundbar should be able to connect to both Bluetooth and Wi-Fi. Ruggedness: Nothing says quality and best soundbar in Australia like a soundbar that’s mudproof, waterproof and dustproof! How much should you spend on a soundbar? Looking for good soundbar deals in Australia can be hard and some of them can be expensive. A good quality soundbar that has a great build and sound should cost a little under $600; however, prices may be higher depending on product features. Are soundbars with built-in subwoofers good? Yes, they are! With built-in subwoofers, you can have the booming sound of a subwoofer without having to connect one to your soundbar. This is especially great when your soundbar is designed to be used outdoors; the subwoofer can make any beach or pool party feel like a live concert—this may be one of the best soundbar deals in Australia! Is a soundbar better than a speaker? Soundbars can prove to be a better alternative to regular speakers in a few ways: They already have multiple speakers built-in. They can give you a surround sound experience without additional speakers. They’re all-in-one devices, sporting an amplifier and other important components. Their slim design makes them easy to pack. They can connect with many other speakers. They’re easy to fit onto a vehicle.   User Manual Download our user manual to get a full understanding of our product.  

 The SoundExtreme SE26 Powersports Bluetooth soundbar speaker and LED lighting system are perfect for your 4WD, ATV/UTV, Boat, and Golf Cart. This Bluetooth soundbar speaker is 100% waterproof, dustproof, and dirtproof. It offers 500 watts of power to eight marine grade speakers that provide a great listening experience. With our EcoCast feature, you can connect up to 50 SoundExtremes at a time!  If you’re looking for a rugged Bluetooth soundbar speaker to pump out some music during your adventures in the outback, The SoundExtreme Powersports soundbar is what you’re looking for!         Tech Specs Features Marine-grade speakers in IP66 Patent Pending enclosure providing 100% waterproof, dirt proof and dustproof audio 500 watts of peak power output 8 marine grade speakers: 2 tweeters, 4 mid-range and 2 side mounted woofers Two internal independently sealed cavities for true left and right stereo sound Bluetooth 5.0 for long range reliable wireless connection to smartphone EcoCast allows up to 50 soundbars to be connected together or connect to any ECOXGEAR speaker with the EcoCast feature. Integrated on speaker controls: Power, mode (Bluetooth/FM/Aux in), volume, skip FWD/Back, Ecocast, lights, Bluetooth Built in microphone for speakerphone calls. Multi-color LED’s backlight all 8 speakers: chose from red, green, white. Sync to music, solid color on or off. Rear Facing 160 Lumen LED light bar can be turned on separately from the speaker LED’s. LED light bar has 5 light modes; Red Light, Yellow Light, White Light (high), White Light (Mid), White Light (low). Waterproof 12V auxiliary power out connection cables to connect to your vehicle’s battery Waterproof Aux In connection port to play audio from a wired device Waterproof Aux out jack to daisy chain to other optional wired speakers Waterproof 5V USB charge out to give a boost to your phone or other devices Mounting brackets and integrated threaded mounting holes for multiple mounting configuration options Size & Weight Width:      64.8cm Height:     11.4cm (14.6cm with Mount) Depth:      11.4cm Weight:    4.8Kg Input & Outputs 5V USB out 2.1 A auxiliary audio in cable audio out cable Power Input Voltage: 12VDC, 10A (requires connection to external DC battery for power) Output Voltage for daisy chaining additional speakers: 12VDC, 10A What's in the Box Warning: The remote control includes a button battery.     Video FAQs  Is the SoundExtreme waterproof & can the SoundExtreme be used over/near water? YES. The SoundExtreme meets the IPX6 waterproof standard. The SoundExtreme can be used by the pool, the hot tub and the ocean without issues. Batten down the hatches and play your tunes worry free! What is IPX6? The IPX6 Waterproof Standard means that the product is protected against strong water jets. This means that IPX6 products, including the SoundExtreme can withstand use around water. Does the SoundExtreme work with any Bluetooth enabled Device? The SoundExtreme waterproof speaker connects to any device that uses Bluetooth connectivity for audio. Laptops, Desktops, Tablets and Smartphones are all compatible! All Apple, Android, Blackberry and Windows devices are sure to be compatible. How far can the SoundExtreme be away from my Bluetooth device? The connectivity for the SoundExtreme is designed and tested to far exceed 9m (up to 30m) from your Bluetooth device. Walls, leaded glass windows and metal studs inside the drywall will affect the range operation. The sound is distorted, how can it be improved? Try lowering the volume control of your connected device or musical instrument. Also, try to reduce the overall volume of the SoundExtreme Can I power a 12V accessory (light bar, etc.) using the Auxiliary Power Out connector on the SoundExtreme? Yes, you can run a light bar or other accessory through the auxiliary wires coming out of the SoundExtreme. The light needs to accept 12V power and should drawless than ~10A current. You must turn on the accessory powered through the SoundExtreme separately from powering on the SoundExtreme, but it is easy to do. Here are the two ways to turn on the power to the accessory connected to the SoundExtreme auxiliary wires: 1. On the SoundExtreme button pad, press and hold the Light Bar button for 3 seconds to enable / disable Accessory Mode (which turns on / off the Auxiliary Power Out connection). 2. On the remote control, press the “Acc” remote switch button to turn on / off the Auxiliary Power Out connection After using one of the above methods to turn on / off the auxiliary power, the speaker will announce, “Accessory mode enabled” or “Accessory mode disabled.” How many Lumens is the light bar on the back of the SoundExtreme? 280 Lumens What is Peak and RMS output of the SoundExtreme SE26 500W Peak / 50W RMS How much current does the SoundExtreme draw? 3-5 Amps at max volume depending on the type of music being played (running at 12V) The SoundExtreme will not pair With Bluetooth Device? Make sure that your device is compatible with Bluetooth. Turn off your SoundExtreme and Bluetooth device, then power on and reconnect. Make sure that Bluetooth mode is selected on your SoundExtreme Volume level is low when playing, how do I make it louder? First, increase the volume on your device to maximum. Next increase the volume on the SoundExtreme by pressing the Volume + button. If increasing the volume on the SoundExtreme and / or increasing the volume on your Bluetooth device does not work, the SoundExtreme may be in Power Save Mode. I am having intermittent issues with the SoundExtreme not connecting correctly to my smartphone via Bluetooth. The Bluetooth module and microcontroller within the SoundExtreme sound bar has a “boot-up” and “power-down” sequence that the unit goes through when turned on and off respectively. This process takes several seconds (~3-5 seconds) to complete. If the SoundExtreme is on and 12V supply power is cut off from the speaker and then quickly power is returned to the speaker, it may cause the SoundExtreme to get stuck in the “boot-up” mode when you turn the SoundExtreme back on again. The best way to reset the SoundExtreme unit to normal function is to unplug the SoundExtreme from the 12V power supply (i.e. battery) for ~10 seconds and then plug it back in. After this, the SoundExtreme should work properly when turned on again. Installation Note: If the SoundExtreme is connected to the accessory junction box (busbar) and the power wire of the SoundExtreme is connected to the 12V ACC power post (this receives power only when the key is ON) on the busbar, then you may find that the above discussed “boot-up” issue may occur with your SoundExtreme (because turning the ignition key cuts off and restores power to the ACC power post). We suggest that you do not hook the SoundExtreme power to ACC power, but to direct 12V battery power. If you are concerned with battery drain issues from having accessories directly attached to the battery, you can add a “kill switch” in-line between the SoundExtreme and the battery so that you can cut power to the SoundExtreme when the vehicle is not in use. Can the SoundExtreme be set up to automatically power on when my vehicle is turned on? No, the SoundExtreme will enter “sleep mode” when it is connected to 12V input power, so you must turn the speaker fully ON by either pressing the POWER button on the SoundExtreme or on the remote provided with the SoundExtreme. How do I mount my SoundExtreme on my vehicle? SoundExtreme includes various mounting brackets and accessories. Utilizing the mounts allows users to mount to vehicle in various ways: • Use mounting brackets and provided screws to mount to vehicle cross bar by drilling holes in cross bar (or other mounting surface…ie vehicle roof, etc.) and using provided screws to bolt mounting brackets onto cross bar • Drill hole through cross bar and use provided screws to secure SoundExtreme to cross bar by screwing directly into top mount rail threaded holes on SoundExtreme • Use mounting brackets and provided worm clamps to secure the SoundExtreme onto a cross bar (without needing to drill holes in cross bar) • Purchase other after-market accessory mounts that are compatible with the SoundExtreme brackets to mount as you see fit. You can find many compatible mount tube/pipe mount options online and Amazon by searching ‘ Universal cage tube clamp mount’. Please make sure to follow AUSTRALIAN DESIGN RULES How do I connect two SoundExtreme units to play audio together? Two or more SoundExtreme units can be synced to play audio together in two ways: 1. Wired: Connect 3.5mm audio cable from first SoundExtreme AUX OUT to AUX IN on second SoundExtreme unit. (both units must be powered on individually) 2. Wireless: Use EcoCast feature on SoundExtreme to wirelessly pair two or more SoundExtreme units - see user guide for full instructions. (both units must be powered on individually) User Manual Download our user manual to get a full understanding of our product.  

The original and the best. Since we invented the LED camp light bar back in 2008, Hardkorr camp light bars have been the only choice for campers who want quality built products that will last for many years. The design has changed and new features introduced over the years, but it�s still made with the same meticulous attention to detail that made us a household name. More recently, many 4�4 enthusiasts have also discovered how useful these lights can be in canopies, tailgates and toolboxes. Hardkorr now supplies these lights to some of the biggest names in 4�4 customisation as well as thousands of DIYers every year. This 48cm LED camping light bar is our most popular and versatile size. It can produce both orange and white light; the orange light will reduce the presence of bugs by up to 90%, while the white light provides maximum brightness. It is commonly used for campsite lighting and illuminating the side doors of touring canopies. This kit also includes accessories for pole mounting, powering, dimming and changing the colour of the light. Key features NEW Tri-colour dimmers: allows you to select between cool white, warm white and orange light at the touch of a button Thicker bar profile for added strength and improved appearance Multiple light bar mounting options: Inbuilt magnets for attachment to most metal surfaces Removable pole clips (sold separately) for easy attachment to non-magnetic tent poles Removable diffusers for a wider angle, softer light beam Removable end caps make flush mount applications look even better by hiding the join between the cable and the bar end Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery From orange to white at the touch of a button.   Often imitated, never duplicated. The LED camp lights that Hardkorr invented are now seen across thousands of Australian campsites. In the years since we introduced them to the market, we�ve developed and released many innovations and improvements designed to make your camping experience comfortable and hassle-free, including orange/white technology, reinforced grommet ends, inbuilt magnets, removable pole clips and more. We�ve now taken the next leap forward in design and technology, making lighting your campsite even easier by addressing some of the key gripes campers had with previous LED lighting technology. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam � no more LEDs shining in your eyes if you�re on the wrong angle! The light bar pole clips make attaching your bars to non-magnetic tent poles much easier. Additionally, flush mounting is now easier and looks better thanks to our wire-covering end caps and flush mount clips (flush mount clips sold separately). And if all that wasn�t enough� our new dimmers give these kits the ability to now produce three shades of light: cool white, warm white and orange! The new warm white setting gives off a light that is nearly as bright as cool white, but with a pleasant soothing warmth to the colour. How does orange light reduce bug presence? Some bugs, like mosquitos and moths, can�t help but move their body towards any light source they can see. This phenomenon is called positive phototaxis. Entomologists still don�t have a complete understanding of why this phenomenon exists, but it is clearly observable in nature. Of course, bugs will only be attracted to light they can see, and there is a useful difference between the spectra of light which are visible to humans compared to bugs. Humans can generally see light which has a wavelength between 380nm (blue) and 740nm (red). Most bugs, conversely, can see light with a wavelength between 300nm and 600nm. The wavelength of our orange LEDs is 610nm, putting them outside of the spectrum visible to must bugs, but still well inside the boundaries of human vision. As a result, most bugs will not congregate around our orange light because they simply don�t know it is there. The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5-year Australian warranty and a 30-day money back guarantee.  

The original and the best. This 25cm orange and white camp light bar is perfect for areas where a strong light beam is desired but space is at a premium. They are commonly used in swags, small tents, inside camper trailer doors, or inside half-size canopy side doors. Since we invented the LED camp light bar back in 2008, Hardkorr camp light bars have been the only choice for campers who want quality built products that will last for many years. The design has changed and new features introduced over the years, but it�s still made with the same meticulous attention to detail that made us a household name. More recently, many 4�4 enthusiasts have also discovered how useful these lights can be in canopies, tailgates and toolboxes. Hardkorr now supplies these lights to some of the biggest names in 4�4 customisation as well as thousands of DIYers every year. This 25cm orange and white camp light bar is perfect for areas where a 48cm or 100cm bar wouldn�t fit or would produce too much light. They are commonly used in swags, small tents, inside camper trailer doors, or inside half-size canopy side doors. NOTE: This camp light bar requires a cigarette lead or 240v transformer for power, and a tri-colour dimmer switch to control it. These and other accessories can be found in our camping light accessories category. Key features Thicker bar profile for added strength and improved appearance Multiple light bar mounting options: Inbuilt magnets for attachment to most metal surfaces Removable pole clips (sold separately) for easy attachment to non-magnetic tent poles Removable diffusers for a wider angle, softer light beam Removable end caps make flush mount applications look even better by hiding the join between the cable and the bar end Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery From orange to white at the touch of a button. Drag the slider to see what happens when you switch our camping lights from their bright white setting over to bug-reducing orange: Often imitated, never duplicated. The LED camp lights that Hardkorr invented are now seen across thousands of Australian campsites. In the years since we introduced them to the market, we�ve developed and released many innovations and improvements designed to make your camping experience comfortable and hassle-free, including orange/white technology, reinforced grommet ends, inbuilt magnets, removable pole clips and more. We�ve now taken the next leap forward in design and technology, making lighting your campsite even easier by addressing some of the key gripes campers had with previous LED lighting technology. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam � no more LEDs shining in your eyes if you�re on the wrong angle! The light bar pole clips make attaching your bars to non-magnetic tent poles much easier. Additionally, flush mounting is now easier and looks better thanks to our wire-covering end caps and flush mount clips (flush mount clips sold separately). And if all that wasn�t enough� our new dimmers give these kits the ability to now produce three shades of light: cool white, warm white and orange! The new warm white setting gives off a light that is nearly as bright as cool white, but with a pleasant soothing warmth to the colour. How does orange light reduce bug presence? Some bugs, like mosquitos and moths, can�t help but move their body towards any light source they can see. This phenomenon is called positive phototaxis. Entomologists still don�t have a complete understanding of why this phenomenon exists, but it is clearly observable in nature. Of course, bugs will only be attracted to light they can see, and there is a useful difference between the spectra of light which are visible to humans compared to bugs. Humans can generally see light which has a wavelength between 380nm (blue) and 740nm (red). Most bugs, conversely, can see light with a wavelength between 300nm and 600nm. The wavelength of our orange LEDs is 610nm, putting them outside of the spectrum visible to must bugs, but still well inside the boundaries of human vision. As a result, most bugs will not congregate around our orange light because they simply don�t know it is there. The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5-year Australian warranty and a 30-day money back guarantee.

The original and the best. Our 100cm orange & white LED camp light bar provides 180 degrees of extra-bright illumination for larger areas such as under awnings or gazebos. It is also handy for lighting up tailgates, large canopies and sheds. Since we invented the LED camp light bar back in 2008, Hardkorr camp light bars have been the only choice for campers who want quality built products that will last for many years. The design has changed and new features introduced over the years, but it�s still made with the same meticulous attention to detail that made us a household name. More recently, many 4�4 enthusiasts have also discovered how useful these lights can be in canopies, tailgates and toolboxes. Hardkorr now supplies these lights to some of the biggest names in 4�4 customisation as well as thousands of DIYers every year. Our 100cm orange/white LED camping light bar kit provides extra bright illumination for open areas such as under awnings or gazebos. It is also handy for illuminating tailgates, larger canopies and even garden sheds or home workshops. This kit also includes accessories for pole mounting, powering, dimming and changing the colour of the light. Key features NEW Tri-colour dimmers: allows you to select between cool white, warm white and orange light at the touch of a button Thicker bar profile for added strength and improved appearance Multiple light bar mounting options: Inbuilt magnets for attachment to most metal surfaces Removable pole clips (sold separately) for easy attachment to non-magnetic tent poles Removable diffusers for a wider angle, softer light beam Removable end caps make flush mount applications look even better by hiding the join between the cable and the bar end Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery From orange to white at the touch of a button. Drag the slider to see what happens when you switch our camping lights from their bright white setting over to bug-reducing orange: Often imitated, never duplicated. The LED camp lights that Hardkorr invented are now seen across thousands of Australian campsites. In the years since we introduced them to the market, we�ve developed and released many innovations and improvements designed to make your camping experience comfortable and hassle-free, including orange/white technology, reinforced grommet ends, inbuilt magnets, removable pole clips and more. We�ve now taken the next leap forward in design and technology, making lighting your campsite even easier by addressing some of the key gripes campers had with previous LED lighting technology. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam � no more LEDs shining in your eyes if you�re on the wrong angle! The light bar pole clips make attaching your bars to non-magnetic tent poles much easier. Additionally, flush mounting is now easier and looks better thanks to our wire-covering end caps and flush mount clips (flush mount clips sold separately). And if all that wasn�t enough� our new dimmers give these kits the ability to now produce three shades of light: cool white, warm white and orange! The new warm white setting gives off a light that is nearly as bright as cool white, but with a pleasant soothing warmth to the colour. How does orange light reduce bug presence? Some bugs, like mosquitos and moths, can�t help but move their body towards any light source they can see. This phenomenon is called positive phototaxis. Entomologists still don�t have a complete understanding of why this phenomenon exists, but it is clearly observable in nature. Of course, bugs will only be attracted to light they can see, and there is a useful difference between the spectra of light which are visible to humans compared to bugs. Humans can generally see light which has a wavelength between 380nm (blue) and 740nm (red). Most bugs, conversely, can see light with a wavelength between 300nm and 600nm. The wavelength of our orange LEDs is 610nm, putting them outside of the spectrum visible to must bugs, but still well inside the boundaries of human vision. As a result, most bugs will not congregate around our orange light because they simply don�t know it is there. The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5-year Australian warranty and a 30-day money back guarantee.

The original and the best. Ideal for a range of uses from canopies and tailgates to tents and sheds, our best-selling 48cm camping light bar is comprised of high-quality materials and throws a strong 180 degree beam of light.  Since we invented the LED camp light bar back in 2008, Hardkorr camp light bars have been the only choice for campers who want quality built products that will last for many years. The design has changed and new features introduced over the years, but it�s still made with the same meticulous attention to detail that made us a household name. More recently, many 4�4 enthusiasts have also discovered how useful these lights can be in canopies, tailgates and toolboxes. Hardkorr now supplies these lights to some of the biggest names in 4�4 customisation as well as thousands of DIYers every year. This 48cm white LED camping light bar is the most popular and versatile size in our range. It is perfect for a range of camping and automotive applications, and can even be used to provide supplementary lighting for workshops or sheds. This kit also includes accessories for pole mounting and powering the light. This kit also includes accessories for pole mounting and powering the light. We recommend you also purchase a switch or dimmer, which can be found in our camping light accessories section. Key features Thicker bar profile for added strength and improved appearance Multiple light bar mounting options: Inbuilt magnets for attachment to most metal surfaces Removable pole clips for easy attachment to non-magnetic tent poles Removable diffusers for a wider angle, softer light beam Removable end caps make flush mount applications look even better by hiding the join between the cable and the bar end Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery Often imitated, never duplicated. The LED camp lights that Hardkorr invented are now seen across thousands of Australian campsites. In the years since we introduced them to the market, we�ve developed and released many innovations and improvements designed to make your camping experience comfortable and hassle-free, including orange/white technology, reinforced grommet ends, inbuilt magnets, removable pole clips and more. We�ve now taken the next leap forward in design and technology, making lighting your campsite even easier by addressing some of the key gripes campers had with previous LED lighting technology. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam � no more LEDs shining in your eyes if you�re on the wrong angle! The light bar pole clips make attaching your bars to non-magnetic tent poles much easier. Additionally, flush mounting is now easier and looks better thanks to our wire-covering end caps and flush mount clips (flush mount clips sold separately). The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5-year Australian warranty and a 30-day money back guarantee.

The original and the best. Great for illuminating larger spaces such as canopies, tailgates and awnings, our durable 100cm camping light bar throws a strong 180 degree beam of light. Since we invented the LED camp light bar back in 2008, Hardkorr camp light bars have been the only choice for campers who want quality built products that will last for many years. The design has changed and new features introduced over the years, but it�s still made with the same meticulous attention to detail that made us a household name. More recently, many 4�4 enthusiasts have also discovered how useful these lights can be in canopies, tailgates and toolboxes. Hardkorr now supplies these lights to some of the biggest names in 4�4 customisation as well as thousands of DIYers every year. This 100cm white LED camp light bar provides extra bright illumination for larger areas such as underneath awnings or gazebos. It is also handy for illuminating tailgates, larger canopies and even garden sheds or home workshops. It comes with accessories required for pole mounting, switching and powering the light. This kit also includes accessories for pole mounting, powering and switching on and off the light. Key features Thicker bar profile for added strength and improved appearance Multiple light bar mounting options: Inbuilt magnets for attachment to most metal surfaces Removable pole clips for easy attachment to non-magnetic tent poles Removable diffusers for a wider angle, softer light beam Removable end caps make flush mount applications look even better by hiding the join between the cable and the bar end Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery Often imitated, never duplicated. The LED camp lights that Hardkorr invented are now seen across thousands of Australian campsites. In the years since we introduced them to the market, we�ve developed and released many innovations and improvements designed to make your camping experience comfortable and hassle-free, including orange/white technology, reinforced grommet ends, inbuilt magnets, removable pole clips and more. We�ve now taken the next leap forward in design and technology, making lighting your campsite even easier by addressing some of the key gripes campers had with previous LED lighting technology. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam � no more LEDs shining in your eyes if you�re on the wrong angle! The light bar pole clips make attaching your bars to non-magnetic tent poles much easier. Additionally, flush mounting is now easier and looks better thanks to our wire-covering end caps and flush mount clips (flush mount clips sold separately). The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5-year Australian warranty and a 30-day money back guarantee.

Hardkorr Lifestyle: great value gear, guaranteed Hardkorr quality. Our Hardkorr Lifestyle 4-bar LED camp light kit is perfect for occasional campers and budget travellers. Representing outstanding value for money, this kit has been manufactured to our meticulous standards and contains all the features you need for a great camping trip. Best of all, two of the included bars come with our famous orange/white light technology! Our new Lifestyle range is perfect for occasional campers and those who like to explore their world on a budget. We�ve spent over 12 months working with our industrial designers, engineers and production team to create a range of products that are incredibly cost-effective without sacrificing the quality and usability which are synonymous with the Hardkorr brand. So if you�re looking for a great everyday range of camping and adventure products that won�t break the bank, look no further than the Hardkorr Lifestyle range. Our best value camp light kit� ever! Don�t be fooled by the price � this is a full-featured camp light kit that is capable of providing bright, usable illumination to medium sized campsites and camper trailers. Each IP68 waterproof bar is constructed of high-quality 6063 aluminium with an ultra-clear epoxy resin coating over the LED chips. All plugs come with screw fittings for hassle-free setup, and the kit also includes two dimmer switches as well as over 11m of double-insulated, oxygen-free cabling. Best of all, two of the light bars included in the pack are equipped with our famous switchable orange/white light technology! Just like in our premium kits, you can select white light for maximum brightness or orange light for a 90% reduction in the presence of bugs � all in the one light bar. Key features Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery     How does orange light reduce bug presence? Some bugs, like mosquitos and moths, can�t help but move their body towards any light source they can see. This phenomenon is called positive phototaxis. Entomologists still don�t have a complete understanding of why this phenomenon exists, but it is clearly observable in nature. Of course, bugs will only be attracted to light they can see, and there is a useful difference between the spectra of light which are visible to humans compared to bugs. Humans can generally see light which has a wavelength between 380nm (blue) and 740nm (red). Most bugs, conversely, can see light with a wavelength between 300nm and 600nm. The wavelength of our orange LEDs is 610nm, putting them outside of the spectrum visible to must bugs, but still well inside the boundaries of human vision. As a result, most bugs will not congregate around our orange light because they simply don�t know it is there. The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12 month Australian warranty and a 30-day money back guarantee.

An Australian favourite since 2008. Our 6 bar LED camping light kit is designed for family-size camper trailers or large campsites. With 3,000 lumens total light output (on white setting) and over 32m of high quality plug-and-play cabling, this kit gives you ultimate flexibility to light up every part of your setup.,000 LUMENS MAX OUTPUT SWITCH BETWEEN 3 COLOURS 180 DEGREE LIGHT BEAM IP68 WATERPROOF & DUSTPROOF 3.0A CURRENT DRAW SMOOTH DIMMING FUNCTION Since we invented the LED camp light bar back in 2008, Hardkorr camp light kits have been the only choice for campers who want quality built products that will last for many years. The design has changed over time and new features have been introduced, but it�s still made with the same meticulous attention to detail that has seen us become a household name in camp lighting. Our 6 bar LED camping light kit is designed for family-size camper trailers or large campsites. With 3,000 lumens total light output (on white setting) and over 32m of high quality plug-and-play cabling, this kit gives you ultimate flexibility to light up every part of your setup. Each bar comes with both orange and white LEDs, and using our exclusive tri-colour dimmer switches, you can create three distinct colours of light � cool white, warm white and orange. The cool white light provides maximum brightness, whereas the new warm white setting gives off a light that is almost as bright as cool white, but with a pleasant soothing warmth. It�s perfect for setting a calm, happy mood in your campsite, particularly later at night. Finally, switching to the orange light naturally reduces the presence of bugs by up to 90%, and is particularly useful around food preparation and eating areas. The dimmer switch comes with our removable pole clips so you can attach it to a tent or awning pole, giving you one less thing to worry about misplacing out in the bush. DID YOU KNOW? Our LED Camp Light Kits are also a very popular choice for lighting up ute canopies and 4�4 cargo areas.  Key features NEW Tri-colour dimmers: allows you to select between cool white, warm white and orange light at the touch of a button Thicker bar profile for added strength and improved appearance Multiple light bar mounting options: Inbuilt magnets for attachment to most metal surfaces Removable pole clips for easy attachment to tent poles (including non-magnetic aluminium poles) Removable diffusers for a wider angle, softer light beam Removable end caps make flush mount applications look even better by hiding the join between the cable and the bar end Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery From orange to white at the touch of a button. Drag the slider to see what happens when you switch our camping lights from their bright white setting over to bug-reducing orange: Often imitated, never duplicated. The LED camp lights that Hardkorr invented are now seen across thousands of Australian campsites. In the years since we introduced them to the market, we�ve developed and released many innovations and improvements designed to make your camping experience comfortable and hassle-free, including orange/white technology, reinforced grommet ends, inbuilt magnets, removable pole clips and more. We�ve now taken the next leap forward in design and technology, making lighting your campsite even easier by addressing some of the key gripes campers had with previous LED lighting technology. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam � no more LEDs shining in your eyes if you�re on the wrong angle! The light bar pole clips make attaching your bars to non-magnetic tent poles much easier. Additionally, flush mounting is now easier and looks better thanks to our wire-covering end caps and flush mount clips (flush mount clips sold separately). And if all that wasn�t enough� our new dimmers give these kits the ability to now produce three shades of light: cool white, warm white and orange! The new warm white setting gives off a light that is nearly as bright as cool white, but with a pleasant soothing warmth to the colour. How does orange light reduce bug presence? Some bugs, like mosquitos and moths, can�t help but move their body towards any light source they can see. This phenomenon is called positive phototaxis. Entomologists still don�t have a complete understanding of why this phenomenon exists, but it is clearly observable in nature. Of course, bugs will only be attracted to light they can see, and there is a useful difference between the spectra of light which are visible to humans compared to bugs. Humans can generally see light which has a wavelength between 380nm (blue) and 740nm (red). Most bugs, conversely, can see light with a wavelength between 300nm and 600nm. The wavelength of our orange LEDs is 610nm, putting them outside of the spectrum visible to must bugs, but still well inside the boundaries of human vision. As a result, most bugs will not congregate around our orange light because they simply don�t know it is there.   The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5-year Australian warranty and a 30-day money back guarantee.

The original and the best. Our 4 bar LED camping light kit is designed for medium sized campsites or camper trailers. With 2,360 lumens total light output (on white setting) and over 24m of high quality plug-and-play cabling, this kit gives you plenty of flexibility to light up every part of your setup. Since we invented the LED camp light bar back in 2008, Hardkorr camp light kits have been the only choice for campers who want quality built products that will last for many years. The design has changed over time and new features have been introduced, but it�s still made with the same meticulous attention to detail that has seen us become a household name in camp lighting. Our 4 bar LED camping light kit is designed for medium sized campsites or camper trailers. With 2,360 lumens total light output (on white setting) and over 24m of high quality plug-and-play cabling, this kit gives you plenty of flexibility to light up every part of your setup. Each bar comes with both orange and white LEDs, and using our exclusive tri-colour dimmer switches, you can create three distinct colours of light � cool white, warm white and orange. The cool white light provides maximum brightness, whereas the new warm white setting gives off a light that is almost as bright as cool white, but with a pleasant soothing warmth. It�s perfect for setting a calm, happy mood in your campsite, particularly later at night. Finally, switching to the orange light naturally reduces the presence of bugs by up to 90%, and is particularly useful around food preparation and eating areas. The dimmer switch comes with our removable pole clips so you can attach it to a tent or awning pole, giving you one less thing to worry about misplacing out in the bush. DID YOU KNOW? Our LED Camp Light Kits are also a very popular choice for lighting up ute canopies and 4�4 cargo areas. To find out more, have a look at this article on our blog: Ute Canopy and 4WD Cargo Area Lighting: A Complete Guide Key features NEW Tri-colour dimmers: allows you to select between cool white, warm white and orange light at the touch of a button Thicker bar profile for added strength and improved appearance Multiple light bar mounting options: Inbuilt magnets for attachment to most metal surfaces Removable pole clips for easy attachment to tent poles (including non-magnetic aluminium poles) Removable diffusers for a wider angle, softer light beam Removable end caps make flush mount applications look even better by hiding the join between the cable and the bar end Reinforced grommets to prevent wire breakage at light bar ends IP68 waterproof rating means the lights are completely watertight (in fact they will run underwater) Waterproof locking DC connectors on all cables Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars Minimal heat output, unlike gas lamps Low power consumption � can be left on all night without affecting your battery From orange to white at the touch of a button. Drag the slider to see what happens when you switch our camping lights from their bright white setting over to bug-reducing orange (6 bar kit shown): Often imitated, never duplicated. The LED camp lights that Hardkorr invented are now seen across thousands of Australian campsites. In the years since we introduced them to the market, we�ve developed and released many innovations and improvements designed to make your camping experience comfortable and hassle-free, including orange/white technology, reinforced grommet ends, inbuilt magnets, removable pole clips and more. We�ve now taken the next leap forward in design and technology, making lighting your campsite even easier by addressing some of the key gripes campers had with previous LED lighting technology. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam � no more LEDs shining in your eyes if you�re on the wrong angle! The light bar pole clips make attaching your bars to non-magnetic tent poles much easier. Additionally, flush mounting is now easier and looks better thanks to our wire-covering end caps and flush mount clips (flush mount clips sold separately). And if all that wasn�t enough� our new dimmers give these kits the ability to now produce three shades of light: cool white, warm white and orange! The new warm white setting gives off a light that is nearly as bright as cool white, but with a pleasant soothing warmth to the colour. How does orange light reduce bug presence? Some bugs, like mosquitos and moths, can�t help but move their body towards any light source they can see. This phenomenon is called positive phototaxis. Entomologists still don�t have a complete understanding of why this phenomenon exists, but it is clearly observable in nature. Of course, bugs will only be attracted to light they can see, and there is a useful difference between the spectra of light which are visible to humans compared to bugs. Humans can generally see light which has a wavelength between 380nm (blue) and 740nm (red). Most bugs, conversely, can see light with a wavelength between 300nm and 600nm. The wavelength of our orange LEDs is 610nm, putting them outside of the spectrum visible to must bugs, but still well inside the boundaries of human vision. As a result, most bugs will not congregate around our orange light because they simply don�t know it is there.   The Hardkorr guarantee All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5-year Australian warranty and a 30-day money back guarantee.