SPARE PARTS

500 Amp Battery Isolator Switch complete with 4 x mounting bolts with nuts Product Dimensions - 67mm x 67mm x 75mm

Carbon Winches Australia - Winch control box wired remote mounted plug extension lead to suit July 2021-On winch - V2 and V3 THIS WILL ONLY SUIT V2/V3 WINCHES, IF UNSURE PLEASE CALL TO CHECK If you have hidden your control box inside your bullbar, or have a bumper replacement bullbar such as a GM Fab bar or Rhino bar and cannot easily access your control box to plug in the hand remote, use this product to remotely mount the plug, either on your bumper or inside your engine bay. Such a simple item makes plugging in your wired controller a breeze. One less stress when out on the track, as guaranteed, when the wired controller comes out, you will most likely be wanting to think about more important things like is my rig filling up with bog hole water as I try and plug this controller in!  Extension is approximately 1450mm long. 

Carbon Winches Australia Fully Sealed Solenoid - 600amp peak rating Our solenoid is supremely reliable. With zero warranties or failures since its release, you can be sure this solenoid unit will do the job for your winching duties.   

Carbon Winches Wireless Remote Control kit. Plug in replacement of the receiver box inside the control box with a matched remote controller. 

This is a 12 volt winch replacement CONTROL BOX, COMPLETE with WIRELESS CONTROLLER. Suitable for CW-12k, CW-95P and CW-17K models only. The Carbon Offroad 12 volt control box and is an advanced, modern and powerful replacement for your original winch control. This device incorporates a wireless remote that gives you the ability to stay in the cab of your truck but still have complete control over activating or deactivating on site. The carbon offroad 12 volt "control box" also ensures a precise, even amount of power used for every pull as opposed to just one strong one. And unlike the old-fashioned cable, you never have to risk getting tangled from ground level again!

500 Amp Battery Isolator Switch complete with 4 x mounting bolts with nuts and a 30cm power cable Product Dimensions - 67mm x 67mm x 75mm

Carbon Winches Australia 24m x 10mm Synthetic Rope Spliced with thimble Same high strength 8000kg rope we use on the Carbon Winches HOOK NOT INCLUDED

Carbon Winches Australia Fully Sealed Solenoid - 600amp peak rating Our solenoid is supremely reliable. With zero warranties or failures since its release, you can be sure this solenoid unit will do the job for your winching duties.   

Mounting bolt kit to mount winch to a winch compatible bullbar.  15 x 15mm square head nuts. Mounting bolts are 10x40mm long.  All hardware Grade 8 High tensile.   

Carbon Winches winch motor breather parts kit - no hose included.  3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.    Included in the kit:  Right angle push to fit threaded breather to motor fitting right angled mounting bracket self drilling mounting screw with urethane washer brass porous breather fitting and push to fit fitting for the breather end 

Carbon Winches Australia 12V Winch Motor This winch motor will replace the winch motor on the CW-12k and the CW-95P motor. 12 volt 6.2 HP motor. Keyway shaft, not compatible with warn style splined motors. Motor breather deleted (no longer required) due to phase out of v1 12k winches. 

Carbon Winches winch motor breather parts kit - no hose included.  3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.    Included in the kit:  Right angle push to fit threaded breather to motor fitting right angled mounting bracket self drilling mounting screw with urethane washer brass porous breather fitting and push to fit fitting for the breather end 

Carbon Winches Wireless Remote Control kit. Plug in replacement of the receiver box inside the control box with a matched remote controller. 

Carbon Winch 4500lb Replacement Synthetic rope kit

An upgraded high impact Nylon replacement T-piece for the fixed key isolator switch. This key can be removed from the switch body by undoing the grub screw located underneath the central cap in the top centre of the T-piece. 

35cm long 25mm2 Battery cable used to connect a battery isolator switch to the battery.

Polished billet aluminium fairlead