Carbon Offroad

The coils packaged with the YP654-2530-A-YAUD-R Kit box. 150-200kg constant load. 

Hook comes as is no box good condition, parts included as seen in the photos.  minor surface scratches 

Carbon Winches winch motor breather parts kit - no hose included.  3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.    Included in the kit:  Right angle push to fit threaded breather to motor fitting right angled mounting bracket self drilling mounting screw with urethane washer brass porous breather fitting and push to fit fitting for the breather end 

100 Amp Replacement Midi Fuse 

This is a 12 volt winch replacement CONTROL BOX, COMPLETE with WIRELESS CONTROLLER. Suitable for CW-12k, CW-95P and CW-17K models only. The Carbon Offroad 12 volt control box and is an advanced, modern and powerful replacement for your original winch control. This device incorporates a wireless remote that gives you the ability to stay in the cab of your truck but still have complete control over activating or deactivating on site. The carbon offroad 12 volt "control box" also ensures a precise, even amount of power used for every pull as opposed to just one strong one. And unlike the old-fashioned cable, you never have to risk getting tangled from ground level again!

This winch mounting spacer kit was requested by owners of winch bull bars that were specifically made to fit the narrow style Warn High Mount Winches. A lot of people simply want to run a low mount style winch like the Carbon Winch CW-12k winch. The main issue with these high mount winch bullbars is the centre cradle usually has wings that sweep back to the main part of the bar, meaning the wider low mount winch will hit on the electric motor side before it's able to reach the mounting cradle surface. and and Our 25mm thick spacers will provide sufficient clearance rearward to clear the motor on the bullbars. We slotted the holes to allow for tolerances on the bar and allow you to position the spacer to your desired mounting position. and and There are no bolts supplied with this kit, due to multiple applications and mounting situations it's hard to cater for every application. You can source Grade 8.8 high tensile mounting bolts in your required length from any hardware or bolt supplier. and Specs: and 6061 T6 Aluminium - Australian Made 25mm thick 38mm wide 4 x Spacers in kit. and

Hook comes as is no box good condition, parts included as seen in the photos.  minor surface scratches 

316 stainless steel Tie bar replacement bolts and spring washers

400 Amp Replacement Mega Fuse TO SUIT CW-FUSE-KIT-400

A great addition to any winch installation giving you piece of mind. Can be used for many applications 400amp MEGA fuse block with fuse  Included  Mega Fuse Holder  Clear Cover  1 x 400amp Mega Fuse Plated Hardware

Hook comes as is no box good condition, parts included as seen in the photos.  minor surface scratches 

50 Amp Replacement Midi Fuse

35cm long 25mm2 Battery cable used to connect a battery isolator switch to the battery.

Carbon Winch 12k 12000lb Electric 12v 4x4 WinchVersion 3 - Now IP68 Waterproof5 Year Australian WarrantyLightest 4x4 Winch Due to strong customer demand the Carbon Winch range has gone ALL BLACK.  The all new feature packed Ver 3 12000lb Winch from Carbon Offroad delivers a 4WD winch package boasting many extras to make the installation and use of your winch that much easier. The Carbon Winch features a newly upgraded rating of IP68, so your river crossings and mud runs are stress free, featuring a breathable membrane style motor breather for heat expansion and contraction. The Carbon Winch gets your recovery done with ease by using the wireless or wired remote (both included) from the safety and convenience of your driver's seat. IP68 meaning - Ingress Protection6 - Can withstand dust and dirt8 - Can be submerged under freshwater for 30 minutes up to 1.5m depth, but not during operation. You want the reliability of a winch that will perform when you need it to, time after time. The Carbon Winch is a proven performer with year on year sales growth and countless recoveries from the mud bogs of Tassie to the river crossings of the Cape. For peace of mind it's backed here in Australia by a class leading 5 year water ingress & electrical warranty and a lifetime geartrain warranty. We also stock a warehouse of replacement parts here in Australia to get you back winching if the need arises. If you're capable with a few basic tools, installing a Carbon Winch is easy, with step by step instructions and many extras included to get the job done. We also thought of your safety by including an isolator switch with extra cabling, so when you're not using your winch it's safely turned off and no live power wires are at the front of your vehicle. Mounting the control box is easy with a multi fit system that can either be mounted on the winch, above the winch drum or motor. Or with the bracket can be mounted to the vehicle or on top of your bullbar. As you know, "looks" are a big part of any 4x4 build, so we have included in your winch kit an ultra sexy CNC'd anodised alloy signature Carbon fairlead paired with our own robust designed hook that makes you stand out from the crowd. Weight is a serious consideration with all 4wd accessories, the Carbon Winch  is super lightweight at only 19.0kg Carbon Winches 12K Winch is a 12000lb line pull winch and can meet the rugged demands of off-road and utility use in Australian conditions. It is designed to deliver the best value, reliability and service life for a winch user. Get a winch you can trust - Get a Carbon Winch

The Carbon CW-3U 3000lb Light-Duty Trailer and Utility Winch The Carbon CW-3U 3.0K 3000lb winch may be a small winch, but it's one big value when you consider the reliability and the overall quality. Built to handle lighter loads ( to 3,000lb). This winch is overflowing with upgraded features, including a hand remote and wireless remote control to control power in/power-out functions and tie rods for added stability.   SPECIFICATION / PART NUMBERS  CW-3U 3000lb   Part number: CW-3U Rated line pull:  3000lbs, (1360kg) single-line Motor: 12V DC 1.5HP Permanent Magnet motor  Remote Control: Remote Switch, 12� (3.7m) lead. Wireless Remote Control: Included Geartrain: Single Stage Planetary.  Gear Ratio: 153:1 Clutch (freespooling): Split Ring Gear Brake: Self-locking gear train ( Rated Load Holding Drum Diameter/Length: 1.26��/2.87�� (32mm/73mm) Synthetic  Rope: 43�, 3/16�� diameter ( 13m, 4.8 diameter) Fairlead: Roller Mounting Bolt Pattern: 3.0�� x 4.87�� ( 76mm x 124mm ) Winch Dimensions ( L x W x H ): 12.2'' x 5.0'' x 5.0'' (310x 127 x 127mm ) Packing Dimensions( L x W x H ): 15.7��x 7.9'' x 8.7'' ( 400 x 200 x 220mm ) Shipping Weight: 10kg ( 22lbs) Warranty : 1 year     12V DC PERFORMANCE SPECS (first layer of drum) Line PullLbs.(Kgs.) Line SpeedFT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.) 0 20.4(6.2) 10Amps 1/3000(1360) 1000(453) 14.2(4.3) 65Amps 3/2725(1235) 2000(907) 10.9(3.3) 96Amps 3/2480(1125) 3000(1360) 7.7(2.4)

Extend your reach with the Carbon Offroad Winch Extension Strap. You've probably encountered many situations where your desired tree or anchor point is just a bit too far away. The Carbon Offroad Winch Extension Strap is your solution. This essential winch accessory provides the extra length you need to safely and effectively tackle tough recovery situations. It's also useful for reducing the distance to an anchor when performing a double line pull. Key Features: 8000kg rating 20 meters long UV resistant Reinforced loops at both ends Multi-stitched ends 60mm wide Made from high-strength polyester

The Carbon Offroad Monkey Fist winch rope thimble is a great bit of kit. Stop cutting your hands up on old winch hooks with nasty spring gates, this winch thimble offers a user friendly experience when it comes to setting up a winch recovery.  Rating 10,000KG H/D 22mm Stainless Steel Pin The thimble is simply pulled into the fairlead for storage, it is perfectly sized to grab hold of with one hand, leaving the other hand free to help scramble up a hill, or connect up a shackle.  With a 6061 T6 Alloy CNC machined section of billet alloy, this is one sexy bit of gear. Make a statement, get rid of your old hook and get this functional piece of winching gear on your rig. It is Type 3 hard anodised to Milspec requirements allowing your investment in good gear to last through the course of time in our harsh Australian conditions.  The attachment point is compatible with synthetic rope soft shackles and also 4.25T steel bow shackles. The nice radius edges on the mounting eye will not damage your soft shackle. The circlip secured winch rope pin mount means you don't have to stuff around with splicing this onto your winch rope, simply remove the hook and replace with our winch thimble. 

The Carbon Offroad Monkey Fist Kinetic Recovery Rope is a Nylon66(polyamide) double braided core and sheath rope with a specific gravity of 1.21. It is specifically treated with a special coating of the core fibre and sheath fibre which provides a 15% increase in abrasion resistance over similar ropes without the coating. With an average diameter of 24mm, and a breaking strain in excess of 12,000kg, our Carbon Offroad Kinetic Recovery Rope is a true winner when it comes to offroad recovery performance. With a weight of 378gm per metre, it is lightweight but incredibly strong. Nylon is a dynamic fibre, when braided into a rope like ours it offers a high degree of stretch, allowing you to conduct a very safe, progressive recovery without huge shock loading on the vehicle. In fact, the more load you place on the rope, the more it stretches, here's the chart for your reference:  Elastic Elongation Strength Load 10% (1200kg) 20%  (2400kg) 30% (3600kg) Elongation 10.00% 14.00% 19.00% Our ropes also meet the Australian guidelines for recovery strap manufacturing. Even though recovery "ropes" do not have to conform to this standard, we feel that as an industry leader and commitment to providing not only an excellent product but education for new users as well, you will find our Kinetic Ropes conform to this standard. We also include with every rope an instruction manual for safe use of our ropes.     

Shock boot to suit Carbon Offroad 2.0MT shock absorber. and and Please measure the and length from the welded washer on the shaft and to the shock body to ensure correct fitment. and and Long Shock Boot - 26 cm Long and and x 6cm Wide and Short Shock Boot - 18 cm Long x 6cm Wide and and and and

Shock boot to suit Carbon Offroad 2.0MT shock absorber.  Please measure the and length from the welded washer on the shaft and to the shock body to ensure correct fitment.  Long Shock Boot - 26 cm Long and and x 6cm Wide Short Shock Boot - 18 cm Long x 6cm Wide   

Shock boot to suit Carbon Offroad 2.0MT shock absorber. and and Please measure the and length from the welded washer on the shaft and to the shock body to ensure correct fitment. and and Long Shock Boot - 26 cm Long and and x 6cm Wide and Short Shock Boot - 18 cm Long x 6cm Wide and and

Shock boot to suit Carbon Offroad 2.0MT shock absorber.  Please measure the length from the welded washer on the shaft and to the shock body to ensure correct fitment.  Long Shock Boot - 26 cm Long and and x 6cm Wide Short Shock Boot - 18 cm Long x 6cm Wide   

Longer Control box cables to allow mounting of the control box in the engine bay.

With its 5 meter length and 12 tonne breaking strength, this Carbon Offroad tree trunk protector strap can easily fit around even the largest trees; making it a reliable and versatile choice for demanding conditions. Unlike flimsy webbing straps, our tubular sling design offers superior durability and strength without adding bulk.  5 meter length for maximum versatility 75mm wide 12 tonne breaking strength for heavy duty use Durable tubular sling design Reinforced stitched end loops

Carbon Offroad 12V ATV Solenoid To suit our 4500lb and 3000lb winches this solenoid is supremely reliable you can be sure this solenoid unit will do the job for your winching duties. 

  The Carbon Offroad 22000kg Kinetic Rope for Truck Extra Large vehicles is a 38mm x 9m recovery rope with a minimum breaking strain of 22,000Kg. It is specially designed for heavy vehicles like the NPS300 Isuzu, Mistubishi Canter 4x4, Unimog, MAN offroad trucks, as well as agricultural equipment like tractors, harvesters, and industrial rigs such as Bulldozers, graders, and excavators. For the safest and most effective tow recovery setup for trucks and heavy vehicles, combine this rope with our 40T soft shackles.