12K Winch Spares

When the track gets rough, a tired control box can leave you stranded. The Carbon Offroad Winch Accessory Kit 12V is purpose-built as a direct replacement for ageing or damaged factory electrics, keeping your winch running smoothly and dependably for every recovery. Compact, water-sealed, includes both wired and wireless remotes, putting precision control back at your fingertips; whether you’re in the cab or right at the drum. Kit Contents 12V Control Box Wired Remote Wireless Remote Aluminium Fairlead Carbon Stubby Cooler Carbon Keyring

Protect your battery and prevent electrical drain with our high-performance battery isolator switch. Ideal for vehicles and boats, this durable switch offers easy operation and versatile compatibility. Kit Includes: Battery Isolator Switch 4 x mounting bolts with nuts Current & Voltage On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V. Simple Operation The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts. Sturdy Construction The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use. Great Compatibility The battery switch used on DC 12 – 48 V systems to isolate and secure the electrical system. Safety Protection The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use. Specs: Max Current: 275AMax Voltage: 48VSwitch Function: ON-OFFTermination Stud Size: 3/8" (10mm) x 2Operating Temperature: −25°C~85°CHousing Colour: BK-Black

Carbon Winches Australia - Winch control box wired remote mounted plug extension lead to suit July 2021-On winch - V2 and V3 THIS WILL ONLY SUIT V2/V3 WINCHES, IF UNSURE PLEASE CALL TO CHECK If you have hidden your control box inside your bullbar, or have a bumper replacement bullbar such as a GM Fab bar or Rhino bar and cannot easily access your control box to plug in the hand remote, use this product to remotely mount the plug, either on your bumper or inside your engine bay. Such a simple item makes plugging in your wired controller a breeze. One less stress when out on the track, as guaranteed, when the wired controller comes out, you will most likely be wanting to think about more important things like is my rig filling up with bog hole water as I try and plug this controller in!  Extension is approximately 1450mm long. 

Carbon Offroad Fully Sealed 600 Amp 12v Solenoid Engineered for reliability and toughness, the Carbon Offroad fully sealed solenoid delivers consistent high-current power for heavy-duty winching. Rated at 600 amps peak, this solenoid handles demanding loads with ease. Its sealed design protects against water, dust, and mud, making it perfect for all your off-road recovery needs. This solenoid is a direct replacement for our V2 and V3 winches and is compatible with the majority of 12V winches, from low-mount to high-mount models.

Carbon Winches Wireless Remote Control kit. Plug in replacement of the receiver box inside the control box with a matched remote controller. 

This Carbon Offroad 12-volt Control Box is a sophisticated, complete replacement unit, featuring both wired and wireless control capabilities. It's engineered as a direct replacement for our v3 Scout, 12kV3, and v2 winch ranges, and also offers broad compatibility as a highly effective replacement for most other winches on the market. Please verify fitment for your specific application. Experience enhanced convenience and safety with the integrated wireless remote, allowing you to operate your winch securely from within your vehicle. This advanced control box ensures consistent power delivery for precise winching, replacing older, less efficient systems with a modern solution.

Mounting bolt kit to mount winch to a winch compatible bullbar.  15 x 15mm square head nuts. Mounting bolts are 10x40mm long.  All hardware Grade 8 High tensile.   

Carbon Offroad 24m x 10mm Synthetic Rope Spliced with thimble.

When the track gets rough, a tired control box can leave you stranded. The Carbon Offroad Winch Accessory Kit 12V is purpose-built as a direct replacement for ageing or damaged factory electrics, keeping your winch running smoothly and dependably for every recovery. Compact, water-sealed, includes both wired and wireless remotes, putting precision control back at your fingertips; whether you’re in the cab or right at the drum. Kit Contents 12V Control Box Wired Remote Wireless Remote Aluminium Fairlead Carbon Stubby Cooler Carbon Keyring

Protect your battery and prevent electrical drain with our high-performance battery isolator switch. Ideal for vehicles and boats, this durable switch offers easy operation and versatile compatibility. Kit Includes: Battery Isolator Switch 4 x mounting bolts with nuts 30cm power cable Current & Voltage On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V. Simple Operation The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts. Sturdy Construction The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use. Great Compatibility The battery switch used on DC 12 – 48 V systems to isolate and secure the electrical system. Safety Protection The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use. Specs: Max Current: 275AMax Voltage: 48VSwitch Function: ON-OFFTermination Stud Size: 3/8" (10mm) x 2Operating Temperature: −25°C~85°CHousing Colour: BK-Black

Carbon Winches winch motor breather parts kit - no hose included.  3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.    Included in the kit:  Right angle push to fit threaded breather to motor fitting right angled mounting bracket self drilling mounting screw with urethane washer brass porous breather fitting and push to fit fitting for the breather end 

Carbon Offroad Fully Sealed 600 Amp 24v Solenoid Engineered for reliability and toughness, the Carbon Offroad fully sealed solenoid delivers consistent high-current power for heavy-duty winching. Rated at 600 amps peak, this solenoid handles demanding loads with ease. Its sealed design protects against water, dust, and mud, making it perfect for all your off-road recovery needs. This solenoid is a direct replacement for our V2 and V3 winches and is compatible with the majority of 12V winches, from low-mount to high-mount models.  

Keep your terminals protected with this Rubber cover. It replaces the original cover on your Carbon Winch motor and helps keep dirt and moisture out. Details: Fits Carbon Winch motor terminals Protects the terminal from dust and water Easy to install

If you have purchased the Carbon Winches Wired Remote Control Plug Extension Kit -Suit V2 and V3 Part number CWA-PLUGEXTKIT_V2  and you are finding it difficult to fit due to clearance issues. This is a replacement  housing that turns the straight plug into a 90 degree elbow.

Keep your winch motor protected from water and dust with this breather.  Details: direct replacement fitting to our version 1 winches 90° elbow with 1/4 NPT fitting Helps prevent water and dust ingress Easy to install Includes:1 x Motor Breather fitting Have a look at our Breather kit to get the full setup

Replace your worn or damaged gearbox gasket with this genuine Carbon Winch part. Designed to fit between the drum and intermediate housing, it helps keep your gearbox sealed and running smoothly. You will require 2 gaskets for the CW-12kv1 and some CW-12kv2 models. All v3 winches require 1 gearbox gasket. Scout Pro Winches require a different seal. Feel free to get in contact with us in regards to this. Details: Fits Carbon Offroad 12KV1/2/3 Drum and intermediate fitment Helps prevent oil and dust leaks Easy to replace Includes:1 x Gearbox Gasket

Carbon Winches Australia 12V Winch Motor This winch motor will replace the winch motor on the CW-12k and the CW-95P motor. 12 volt 6.2 HP motor. Keyway shaft, not compatible with warn style splined motors. Motor breather deleted (no longer required) due to phase out of v1 12k winches. 

This Carbon Offroad 24-volt Control Box is a sophisticated, complete replacement unit, featuring both wired and wireless control capabilities. It's engineered as a direct replacement for our v3 Scout, 12kV3, and v2 winch ranges, and also offers broad compatibility as a highly effective replacement for most other winches on the market. Please verify fitment for your specific application. Experience enhanced convenience and safety with the integrated wireless remote, allowing you to operate your winch securely from within your vehicle. This advanced control box ensures consistent power delivery for precise winching, replacing older, less efficient systems with a modern solution.

Carbon Winches Australia Winch Seal kit The winch seal kit comes with the following seals: Motor mounting bolt O-rings Motor end cap o-ring Motor to drum end plate gasket Drum polyurethane bushings x 2 Drum Lip seals x 2 Drum end plate to Gearbox gasket Gearbox housing Gasket

Protect your winch motor terminal with this yellow cover. It replaces the original part and helps keep dirt, water, and debris away from the connection point. Details: Fits Carbon Winch motor terminals Protects terminal from dust and moisture Easy to fit and replace Includes:1 x Yellow Terminal Cover

Lost or broken your isolation switch handle? This replacement handle fits Carbon Winch isolation switches and gets you back up and running quickly. Built tough and easy to install. Details: Fits Carbon Winch 12K V1 isolation switches Strong and durable construction Simple to replace Includes:1 x Isolation Switch Handle

Replace your worn drum seal with this genuine Carbon Winch part. Designed for the 12K V1 model, it helps keep water, mud, and dust out of your winch drum for smooth and reliable operation. Details: Fits Carbon Winch 12K V1 Keeps drum sealed from dirt and moisture Easy to install Includes:1 x Drum Seal

Replace or upgrade your control box base plate with this genuine Carbon Winch kit. It provides a solid mounting base for your control box and helps keep your setup neat and secure. Details: Fits Carbon Winch control boxes Strong and durable construction Simple to fit and replace Includes:1 x Control Box Base Plate Kit

Replace your full motor setup with this genuine Carbon V2 12V electric motor. It comes complete with the drum end plate and brake assembly, making it a ready-to-fit solution to get your winch running smoothly again. Details: Fits Carbon Winch V2 12V models Includes motor, drum end plate, and brake assembly Strong, reliable, and built for heavy duty use Easy to install Includes:1 x 12V Electric Motor Assembly with Drum End Plate and Brake

Replace or upgrade your winch solenoid with this 500AMP sealed unit from Carbon Winches Australia. Designed for 24V winch systems, it delivers strong and reliable performance in all conditions. Details: 500AMP sealed solenoid Suits 24V winch systems Weather resistant and durable design Easy to install Includes:1 x 500AMP Sealed Solenoid

Replace your worn or damaged brake unit with this genuine Carbon Winch part. It restores proper braking function to your winch and keeps it operating safely and smoothly. Details: Fits Carbon Winch models Restores reliable braking performance Strong and durable construction Easy to install Includes:1 x Brake Unit

Secure your control box to the base plate with this genuine Carbon Winch bolt set. Perfect for replacing lost or rusted hardware and keeping your setup solid. Details: Fits Carbon Winch control box and base plate Strong and corrosion resistant Easy to install Includes:Set of Mounting Bolts

Replace your old or damaged battery cable terminal with this genuine Carbon Winch lug end. It provides a solid and reliable power connection for your winch setup. Details: Fits Carbon Winch battery cables Strong and durable metal construction Ensures a secure power connection Easy to install Includes:1 x Battery Cable End Lug Terminal