WINCHES & RECOVERY
Customer Care Team
Shop By Collection
Handpicked for You
Winch Parts

Carbon Offroad
Dual layer braided sheath high mount winch rope upgrade kit 11mm x 40m by Carbon Offroad
$239.95
The Carbon Offroad high mount winch rope upgrade kit. The winch rope which provides superior abrasion and UV protection for long lasting life in Australian conditions.
11mm x 40m Long
7000kg minimum breaking strain
12mm width stainless steel black gussetted tube thimble
2m length of 32mm width polyester black abrasion sleeve
12mm tube mount with 7mm mounting hole for connection to winch drum.


Carbon Offroad
Carbon Offroad Winch Hook Utility Mount
$25.00
Are you tired of reaching under your vehicle to unlatch your winch hook from those hard to reach recovery points?
We know the feeling! That's why we created the Carbon Offroad Winch Hook Utility Mount. This innovative accessory provides a convenient and stylish solution; save time and effort with our easy to use winch hook mount!
How it works:
Bolt the hook into the fairlead bolt hole
Attach your winch hook to your new, easily accessible hook point
Key features
Versatile: The M8 metric thread size can be used for a variety of tasks, including hanging items in a canopy or organizing gear on a cargo barrier.
Durable: Constructed from high-quality 6061 T6 alloy and anodized for corrosion resistance.
Customisable: Can be adjusted to fit different winch and vehicle configurations.

Carbon Offroad
Carbon Winches Wireless Remote Control kit 12V
$99.00
Carbon Winches Wireless Remote Control kit. Plug in replacement of the receiver box inside the control box with a matched remote controller.


Carbon Offroad
Carbon Offroad 500 amp Waterproof Battery Isolator Switch Kit with Cable
$49.95
Protect your battery and prevent electrical drain with our high-performance battery isolator switch. Ideal for vehicles and boats, this durable switch offers easy operation and versatile compatibility.
Kit Includes:
Battery Isolator Switch
4 x mounting bolts with nuts
30cm power cable
Current & Voltage
On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.
Simple Operation
The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts.
Sturdy Construction
The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use.
Great Compatibility
The battery switch used on DC 12 – 48 V systems to isolate and secure the electrical system.
Safety Protection
The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use.
Specs:
Max Current: 275AMax Voltage: 48VSwitch Function: ON-OFFTermination Stud Size: 3/8" (10mm) x 2Operating Temperature: −25°C~85°CHousing Colour: BK-Black


Carbon Offroad
Carbon Winches Australia 600amp Sealed Winch Solenoid 12 Volt
$99.00
Carbon Offroad Fully Sealed 600 Amp 12v Solenoid
Engineered for reliability and toughness, the Carbon Offroad fully sealed solenoid delivers consistent high-current power for heavy-duty winching. Rated at 600 amps peak, this solenoid handles demanding loads with ease. Its sealed design protects against water, dust, and mud, making it perfect for all your off-road recovery needs.
This solenoid is a direct replacement for our V2 and V3 winches and is compatible with the majority of 12V winches, from low-mount to high-mount models.


Kaon
FLIP-UP Number Plate Mounting Bracket - Kaon - Aussie Made
$69.95
Flip up number plate holder. 165mm and 210mm hole spacing
Stainless Steel
Low profile design. 26mm offset
Flips your number plate up to 120 degrees
Great for access to the winch.
Will prevent damage or loss of your number plate when doing water crossings.
Made in Australia

Carbon Offroad
Carbon Offroad Stainless Steel Black Powdercoat Pull Up Number Plate Bracket
$99.00
Carbon Offroad Stainless Steel Pull Up Number Plate Bracket
The Carbon bolt on number plate bracket is compatible with both alloy hawse fairleads and roller fairlead mounting systems. It allows you to mount a number plate over the outlet of the fairlead and pull and it out of the way during a winch recovery.
Made from laser cut 1.5mm stainless steel with a semi gloss powdercoat in black.
Easy to use and makes a recovery that much easier.
Mounting hardware not included.
1.5mm stainless steel - black powdercoat finish
Laser cut
Pull up cantilever style with locking knob
Number plate mounting surface - 441mm wide 144mm high
Rear and bracket 340mm wide 88mm high
Number plate mounting surface and can be cut down for a custom finish


Carbon Offroad
Carbon Offroad Monkey Fist Premium 7T x 10M Braided Winch Extension Rope
$139.00
The Carbon Offroad Monkey Fist Winch Extension Rope is an important winch accessory.
You've probably come across plenty of times where that tree or anchor is just a little bit too far away.
It's also handy to reduce the distance of an anchor if doing a double line pull. Our winch extension being rated a minimum breaking strain of 7000kg is suitable for use with all of the winches in our Carbon Winch range.
Made from UHWMPE Fibre + Polyester Outer Braided Sheath with velcro packing strap.
The current batch also contains a luminous fibre to help visibility at night under torch or vehicle lights.
MBS - 7000kg
Sold out

Carbon Offroad
Carbon Winches Standard Hawse Fairlead
$99.00
Carbon winches Billet CNC machined and plated fairlead with no offset to the holes.

Carbon Offroad
Universal Winch Mounting Cradle Carbon Winches Australia
$199.00
Universal Winch Cradle. Use this mounting cradle as a base to build your own winch mount on the front or rear of your vehicle. They can be cut and modified to suit any application. They are drilled for the standard low mount winch bolt pattern and fairlead mounting point.
90cm Long x 19cm wide.
Made from 4.5mm thick steel

Carbon Offroad
Carbon Offroad Wired Remote Control Plug Extension Kit Suit V2 and V3
$39.00
Carbon Winches Australia - Winch control box wired remote mounted plug extension lead to suit July 2021-On winch - V2 and V3
THIS WILL ONLY SUIT V2/V3 WINCHES, IF UNSURE PLEASE CALL TO CHECK
If you have hidden your control box inside your bullbar, or have a bumper replacement bullbar such as a GM Fab bar or Rhino bar and cannot easily access your control box to plug in the hand remote, use this product to remotely mount the plug, either on your bumper or inside your engine bay. Such a simple item makes plugging in your wired controller a breeze. One less stress when out on the track, as guaranteed, when the wired controller comes out, you will most likely be wanting to think about more important things like is my rig filling up with bog hole water as I try and plug this controller in!
Extension is approximately 1450mm long.


Carbon Offroad
Carbon Monkey Fist 10000kg Winch Rope Thimble
$69.95
The Carbon Offroad Monkey Fist winch rope thimble is a great bit of kit.
Stop cutting your hands up on old winch hooks with nasty spring gates, this winch thimble offers a user friendly experience when it comes to setting up a winch recovery.
Rating 10,000KG
H/D 22mm Stainless Steel Pin
The thimble is simply pulled into the fairlead for storage, it is perfectly sized to grab hold of with one hand, leaving the other hand free to help scramble up a hill, or connect up a shackle.
With a 6061 T6 Alloy CNC machined section of billet alloy, this is one sexy bit of gear. Make a statement, get rid of your old hook and get this functional piece of winching gear on your rig. It is Type 3 hard anodised to Milspec requirements allowing your investment in good gear to last through the course of time in our harsh Australian conditions.
The attachment point is compatible with synthetic rope soft shackles and also 4.25T steel bow shackles. The nice radius edges on the mounting eye will not damage your soft shackle. The circlip secured winch rope pin mount means you don't have to stuff around with splicing this onto your winch rope, simply remove the hook and replace with our winch thimble.
Sold out


Carbon Offroad
Mounting Bracket for Battery Isolator Switch - Stainless
$19.00
This local 1.6mm stainless steel battery isolator mounting bracket is designed to be used with the supplied battery isolator switch in the Carbon Offroad Winch kits. The switch can be mounted on the inside or outside faces of the bracket on both sides, giving you various setup options to suit the space available in your engine bay.
The mounting holes are 56mm hole centres and can be used for any similar type battery isolator switch on the market.
Please note:
This bracket is designed to accommodate two bolts fitted diagonally in the isolator. This arrangement ensures clearance for the bolts to fit to the vehicle.
Only install bolts diagonally to avoid any fitting issues.

Carbon Offroad
Carbon Winch Nylon Hook Strap with Logo
$4.99
This hook strap is designed to provide a safe method of carrying the hook without risk of getting fingers jammed in between the gate or other attached accessories.
290mm long


Carbon Offroad
Carbon Offroad 4.75T Bow Shackle
$25.00
Want a tough bow shackle? The Carbon Offroad 4.75T Bow Shackle features anti-rattle insulators which allow you to leave the shackles on your recovery points without chipping the paint off your expensive bull bar; or driving you insane with that annoying rattle.
Key Features:
Made from strong C45 steel and finished with a durable zinc and powder-coasted black coating
Anti-rattle insulators prevent damage to your bullbar's paint and eliminate rattling
Rated to 4.75T

Carbon Offroad
Carbon Winches control box mounting bracket
$27.95
Mounting bracket to mount the control box to the winch drum endplate.


Carbon Offroad
Carbon Winch Motor Breather Kit 90 Deg Elbow 1/4 NPT airline fitting
$5.99
Keep your winch motor protected from water and dust with this breather.
Details:
direct replacement fitting to our version 1 winches
90° elbow with 1/4 NPT fitting
Helps prevent water and dust ingress
Easy to install
Includes:1 x Motor Breather fitting
Have a look at our Breather kit to get the full setup

Carbon Offroad
1/4 inch airline for breather kit. Orange colour - sold per metre
$3.95
Carbon Winches winch motor breather parts kit - no hose included.
3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.
Included in the kit:
Right angle push to fit threaded breather to motor fitting
right angled mounting bracket
self drilling mounting screw with urethane washer
brass porous breather fitting and push to fit fitting for the breather end

Carbon Offroad
Carbon Replacement Isolation Switch Handle
$5.95
Lost or broken your isolation switch handle? This replacement handle fits Carbon Winch isolation switches and gets you back up and running quickly. Built tough and easy to install.
Details:
Fits Carbon Winch 12K V1 isolation switches
Strong and durable construction
Simple to replace
Includes:1 x Isolation Switch Handle


Carbon Offroad
Carbon Winches Australia 600amp Sealed Winch Solenoid 24 Volt
$99.00
Carbon Offroad Fully Sealed 600 Amp 24v Solenoid
Engineered for reliability and toughness, the Carbon Offroad fully sealed solenoid delivers consistent high-current power for heavy-duty winching. Rated at 600 amps peak, this solenoid handles demanding loads with ease. Its sealed design protects against water, dust, and mud, making it perfect for all your off-road recovery needs.
This solenoid is a direct replacement for our V2 and V3 winches and is compatible with the majority of 12V winches, from low-mount to high-mount models.
Sold out

Carbon Offroad
Steel Cable 24m x 10mm Carbon Winches Australia
$149.95
24 metres of 10mm steel winch cable. Suits any low mount 4wd winch. Has a machine swaged eye for hook and a swaged end terminal to connect to the drum.
Choose a cast iron hawse fairlead as an option.

Carbon Offroad
Monkey Fist All Purpose Recovery Rope 4m x 14155kg
$99.00
The Monkey Fist All Purpose Recovery Rope. 4m x 16mm.
Manufactured with a UHMWPE core and thick braided sheath for great abrasion resistance this rope is a short, tough and ultra handy recovery rope.
The eye splices offer 200mm length openings with a 32mm wide abrasion sheath for long lasting protection on wear points.
4 metres long with dual protected eyelets with a minimum breaking strain of 14155kg. Reach out to that winch anchor just out of reach, tow your mate, use as a bridle strap and more.
What can you do with it?
Here are just some examples:
Sling a rock for an anchor or a pully for direction change to anchor
Use as a bridle strap between two front recovery points
Use as a short tow line
Use as a winch extension line

Carbon Offroad
UHMWPE Synthetic Winch Extension Rope 21m x 10mm
$125.00
Carbon offroad Winch extension rope. The length is approximately 21 metres long with a minimum breaking strain of 7000kg.
Sold out

Carbon Offroad
25mm Winch Mount Spacer Kit
$34.00
This winch mounting spacer kit was requested by owners of winch bull bars that were specifically made to fit the narrow style Warn High Mount Winches. A lot of people simply want to run a low mount style winch like the Carbon Winch CW-12k winch. The main issue with these high mount winch bullbars is the centre cradle usually has wings that sweep back to the main part of the bar, meaning the wider low mount winch will hit on the electric motor side before it's able to reach the mounting cradle surface. and
and
Our 25mm thick spacers will provide sufficient clearance rearward to clear the motor on the bullbars. We slotted the holes to allow for tolerances on the bar and allow you to position the spacer to your desired mounting position. and
and
There are no bolts supplied with this kit, due to multiple applications and mounting situations it's hard to cater for every application. You can source Grade 8.8 high tensile mounting bolts in your required length from any hardware or bolt supplier. and
Specs: and
6061 T6 Aluminium - Australian Made
25mm thick
38mm wide
4 x Spacers in kit. and

Carbon Offroad
Carbon Offroad 8 Tonne Snatch block pulley V2
$49.00
A more compact version of our original snatch block.
Solid, reliable and simple. A grease nipple for the shaft is available to maintain the shaft for the pulley sheave.
Please ensure this is greased before use.
8 Tonne
Unit weight is 2.075Kg
Sold out

Carbon Offroad
Winch Alloy Fairlead to suit CW-45 4500lb ATV winch
$69.00
Polished billet aluminium fairlead

Carbon Offroad
Carbon Winch 4500lb Replacement Synthetic rope kit
$99.00
Replace your old or worn rope with this genuine Carbon Winch 4500lb synthetic rope kit. Strong, lightweight, and easy to install, it gets your winch ready for action in no time.
Details:
Fits Carbon Winch 4500lb models
High-strength 6mm x 15m synthetic rope
Easy to fit and use
Includes:1 x Direct replacement Synthetic Rope
1 x Thimble to suit ATV winch hook

Carbon Offroad
Carbon 8 Tonne x 20m Winch Extension Strap
$164.00
Extend your reach with the Carbon Offroad Winch Extension Strap.
You've probably encountered many situations where your desired tree or anchor point is just a bit too far away. The Carbon Offroad Winch Extension Strap is your solution. This essential winch accessory provides the extra length you need to safely and effectively tackle tough recovery situations. It's also useful for reducing the distance to an anchor when performing a double line pull.
Key Features:
8000kg rating
20 meters long
UV resistant
Reinforced loops at both ends
Multi-stitched ends
60mm wide
Made from high-strength polyester

Carbon Offroad
Carbon Winches Wireless Remote Control kit 24V
$99.00
Control your winch from a distance with this Carbon Winches 24V wireless remote kit. It’s easy to install and gives you reliable operation for your 24V winch setup.
Details:
Works with 24V Carbon Winches
Simple plug and play installation
Strong and reliable signal
Compact and easy to use
Includes:1 x Wireless Receiver1 x Wireless Remote
Sold out


Carbon Offroad
Carbon Winch Motor Breather Parts kit - no airline
$19.95
Carbon Winches winch motor breather parts kit - no hose included.
3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.
Included in the kit:
Right angle push to fit threaded breather to motor fitting
right angled mounting bracket
self drilling mounting screw with urethane washer
brass porous breather fitting and push to fit fitting for the breather end

Carbon Offroad
Carbon Tow Hitch Winch Mounting Cradle
$149.00
Tow Hitch Winch Cradle
Use this 50mm tow hitch mount to make your winch a portable solution.
The carry handles can be folded over the top of the winch for compact storage.
Suits low mount Winch
Delivering Solutions
Our team are solution providers. We love the task of being able to listen to your requirements and consult with you through to a solution which meets your needs and exceeds your expectations.Shaping the Future of Offroad
More than ever before Carbon Offroad continue to innovate, invent, improve and deliver product outcomes in the offroad space which are unmatched in the marketProudly 100% Australian Owned
Carbon Offroad is a privately owned enterprise delivering small business personalised levels of service to the wider offroad industry. Our purpose is to create products that people love, that offer a truly tangible benefit to the end user.Call Us
+61 1300 780 141
Mon-Fri, 9am-5pm (AEST)
Sat-Sun, Closed
Email Us
sales@carbonoffroad.com.au
Visit Us
1a/1 Waterway Drive, Coomera
4209
KPD Industries Pty Ltd
ABN: 80 142 983 382
