Carbon Offroad
Carbon Offroad Monkey Fist 10T Recovery Ring
$69.00
The Monkey Fist Solid Recovery Ring: A Must-Have for Enhanced Recovery Efficiency
Elevate your offroad recovery capabilities with the Monkey Fist Solid Recovery Ring, a premium addition to the Carbon Offroad line of lightweight and durable recovery gear.
Designed to work seamlessly with the Monkey Fist Soft Shackle, this solid billet 6061 T6 aluminium recovery ring allows you to set up a double line pull with your synthetic rope electric winch, significantly increasing your recovery capacity.
Featuring laser branding (not embossed, CNCed, or stamped branding, which could affect the operation of the ring against the soft shackle) and a low-friction, anodized finish, this solid recovery ring will provide years of trouble free double line pulls.
Key Features:
Rated to 10000kg
Solid billet 6061 T6 aluminium construction
Compatible with Monkey Fist soft shackle
Enables double line pulls for increased recovery capacity
Low friction anodized finish for smooth operation
Carbon Offroad
Carbon Offroad Wired Remote Control Plug Extension Kit Suit V2 and V3
$39.00
Carbon Winches Australia - Winch control box wired remote mounted plug extension lead to suit July 2021-On winch - V2 and V3
THIS WILL ONLY SUIT V2/V3 WINCHES, IF UNSURE PLEASE CALL TO CHECK
If you have hidden your control box inside your bullbar, or have a bumper replacement bullbar such as a GM Fab bar or Rhino bar and cannot easily access your control box to plug in the hand remote, use this product to remotely mount the plug, either on your bumper or inside your engine bay. Such a simple item makes plugging in your wired controller a breeze. One less stress when out on the track, as guaranteed, when the wired controller comes out, you will most likely be wanting to think about more important things like is my rig filling up with bog hole water as I try and plug this controller in!
Extension is approximately 1450mm long.
Carbon Offroad
Monkey Fist All Purpose Recovery Rope 4m x 14155kg
$99.00
The Monkey Fist All Purpose Recovery Rope. 4m x 16mm.
Manufactured with a UHMWPE core and thick braided sheath for great abrasion resistance this rope is a short, tough and ultra handy recovery rope.
The eye splices offer 200mm length openings with a 32mm wide abrasion sheath for long lasting protection on wear points.
4 metres long with dual protected eyelets with a minimum breaking strain of 14155kg. Reach out to that winch anchor just out of reach, tow your mate, use as a bridle strap and more.
What can you do with it?
Here are just some examples:
Sling a rock for an anchor or a pully for direction change to anchor
Use as a bridle strap between two front recovery points
Use as a short tow line
Use as a winch extension line
Carbon Offroad
Carbon Offroad Essential Snatch and Winch 4x4 Recovery Kit
$299.00
The Carbon Offroad Essential Snatch and Winch 4x4 Recovery Kit is designed to equip the 4x4 operator with the necessary essential recovery products to safely perform two major tasks in safe vehicle recovery.
Firstly, for snatch or tow recovery, the kit is equipped with an 8000kg x 9 meter long snatch strap, along with the included steel D-shackles and synthetic leather gloves for the user allowing safe connection to the vehicle being recovered and the vechicle conducting the tow recovery.
Secondly, for winch recovery, the operator can safely perform both a single line and a double line pull with the tree trunk protector strap, D-shackles, snatch block, and gloves.
This kit configuration is unique on the market, as no other brand offers such a comprehensive all-in-one package.
Bag Features:
500 denier ripstop oxford canvas material
Heavy duty webbing straps
Heavy duty zipper closure
Internal pockets for snatch block and D-shackles
Sleeves under lid for gloves storage
Contents
1 x Recovery Bag
2 x Carbon Offroad Monkey Fist 15T Synthetic Soft Shackle
1 x Carbon Offroad 8 Tonne x 9 Metre Snatch Strap
2 x Carbon Offroad Bow Shackle
1 x 10T Recovery Ring
1 x Pair of Carbon Offroad Ultimate Recovery Gloves
1 x 12T 5m Tree Trunk Protector Strap
Carbon Offroad
Carbon Offroad 500 amp Waterproof Battery Isolator Switch Kit with Cable
$49.95
Protect your battery and prevent electrical drain with our high-performance battery isolator switch. Ideal for vehicles and boats, this durable switch offers easy operation and versatile compatibility.
Kit Includes:
Battery Isolator Switch
4 x mounting bolts with nuts
30cm power cable
Current & Voltage
On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.
Simple Operation
The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts.
Sturdy Construction
The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use.
Great Compatibility
The battery switch used on DC 12 – 48 V systems to isolate and secure the electrical system.
Safety Protection
The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use.
Specs:
Max Current: 275AMax Voltage: 48VSwitch Function: ON-OFFTermination Stud Size: 3/8" (10mm) x 2Operating Temperature: −25°C~85°CHousing Colour: BK-Black
Carbon Offroad
Carbon Tank series winch control box extension plug kit 90 Deg mounting bracket
$9.99
This is a plug extension kit 90 degree angle mounting bracket for the Carbon Tank series.
The plug is a flush mount design and is plug and play into the Tank Series control box across the 12000, 15000 and 20000lb winches. The plug is waterproof so there is no issue for a permanent mount solution.
This is the separate right angle mounting bracket available which can be used for an in engine bay mounting solution off the inside guard panel for example.
Carbon Offroad
Carbon Winches Australia 500amp Sealed Winch Solenoid 12 Volt
$95.00
Carbon Winches Australia Fully Sealed Solenoid - 500amp peak rating
Carbon Offroad
Carbon Offroad 1.5m Control Box Extension Kit
$95.00
$105.00
Longer Control box cables to allow mounting of the control box in the engine bay.
Diesel Power Modules Tuning Chips
Ford Diesel Power Performance Chip Tuning Module - 4WD Ranger PX2 3.2
$749.95
Vehicle Engine KW Power Before KW Power After KWIncrease NM Torque Before NM Torque After NMIncrease Mod. Channels Installation Part Number BT-50 pre 2011 2.5 2.5 TDCi 105 123 >18kw 330 389 >59nm Fuel Plug In DP-FORUB BT-50 pre 2011 3.0 3.0 TDCi 115 135 >20kw 380 448 >68nm Fuel Plug In DP-HOLUO20 BT50 2011+ 3.2 3.2 TDI 147 173 >26kw 470 554 >84nm Fuel/Boost Plug In DP-FORUF22 BT-50 2011+ 2.2 2.2 CD 110 129 >19kw 375 435 >60nm Fuel/Boost Plug In DP-FORUF22 Power figures (at motor) are to be used as a guide only. Whilst care has been taken to provide an accurate figure, results may vary from vehicle to vehicle. Please note - for all wire-in modules, the use of HID spotlights and headlights will damage the diesel power module - refer to warranty page DIESEL POWER Performance Chip Modules are an aftermarket performance accessory designed to allow your common rail diesel and some petrol turbo charged car, boat, truck, tractor and farm equipment motors to make more power and torque, offering increased driveability of your vehicle for a number of uses. Diesel Power Performance Chip Modules offer benefits for everyday use, towing the caravan or work trailer. The Diesel Power Performance Chip System is easy to install in less than 15 minutes. Easy to remove or bypass for vehicle servicing. A bypass plug is included with every module to remove the module without removing the module harness if desired. INCREASED POWER AND PERFORMANCE - ACTIVE SOFTWARE MANAGEMENT 64mhz processor controlling up to 2 output channels fuelling and boost control and one input channel for fine tuning based on engine temperature on some applications. The Diesel Power software automatically adjusts to the vehicles load and RPM. Customers experience an increase in power (Torque and Kilowatts) while decreasing fuel consumption when driven accordingly. User adjustable fuel control. There is no need for complicated laptop tuning, you can adjust the fuelling using the dial on the front of the module to modify for additional performance enhancements such as larger exhaust systems, to get more power or to tune more for economy depending on your application. GERMAN DESIGNED AND MANUFACTURED Every diesel engine optimisation module is made to demanding German quality standards using German manufactured military grade electronic hardware. TUV testing of a tuning module includes: Verifying the use of quality materials in the manufacture of an automotive product. Emissions standards are similar to the original manufacturers standards. No danger in the fit or use of the product. Verifying that stated power and economy figures are accurate and are not misleading. In the case of a tuning module, TUV approval means the product complies with European legal exhaust-emissions standards. PACKAGE CONTENTS When you purchase a Diesel Power Performance Chip Module you receive: 1 x Diesel Power Performance Chip Module 1 x Installation harness 1 x Bypass plug - Returning your vehicle to standard tuning without having to remove the harness 1 x Module Synthetic bag with velcro fitting strap 1 x Installation instructions
King Springs
King Springs Fits Toyota Fortuner 100-300kg Rear Coil Springs 40-50mm Lift
$279.00
King Springs leads the way in the design and manufacture of advanced progressive springs with both variable pitch and tapered wire forms. King Springs service all sectors of the automotive market including passenger, commercial and Four Wheel Drive vehicles and various Motorsport categories including circuit, rally, speedway and off-road racing.
King Springs was established in 1956 on Queensland's Gold Coast.
Our complex comprises three adjoining factories spanning 8000 square metres.
Administration, manufacturing and warehousing all function from this one location employing over 70 people.
All King Springs are CAD designed
Only X5K Material is used, this is a new generation of high strength Spring Steel which with-stands higher operating stresses and has superior resistance to sagging.
Peeling & Tapering - Bar peeling and tapering of 1mm from the surface removes all imperfections.
Gas heating is used for the furnaces for their clean and efficient heating
All coils are made with a computer controlled process for precise tolerances
Once the coil has been rolled it is placed into an oil quenching bath at 850 degrees Celsius and hardened to 62 HRC Rockwell Hardness.
the coil is then tempered in an oven at 400 degrees Celsius and is tempered to 54 HRC
If the coil requires a flat seat it is the ground to suit in a computer controlled wet grinder
The coil si then shot peened to stress relieve the outer surface for a uniformed finish and optimal power coat surface
Dipped in phosphate for corrosion protection
Epoxy powder coated for a durable finish and presentation
Carbon Offroad
Carbon Winches 10 Ton Snatch block pulley
$49.00
Carbon Winches Australia
10 Ton Snatch Block Pully
Compatible with all steel cable or synthetic rope from 8-12mm
King Springs
King Springs D23 Navara 300-500kg Rear Coils 40-50mm Lift
$279.00
King Springs leads the way in the design and manufacture of advanced progressive springs with both variable pitch and tapered wire forms. King Springs service all sectors of the automotive market including passenger, commercial and Four Wheel Drive vehicles and various Motorsport categories including circuit, rally, speedway and off-road racing.
King Springs was established in 1956 on Queensland's Gold Coast.
Our complex comprises three adjoining factories spanning 8000 square metres.
Administration, manufacturing and warehousing all function from this one location employing over 70 people.
All King Springs are CAD designed
Only X5K Material is used, this is a new generation of high strength Spring Steel which with-stands higher operating stresses and has superior resistance to sagging.
Peeling & Tapering - Bar peeling and tapering of 1mm from the surface removes all imperfections.
Gas heating is used for the furnaces for their clean and efficient heating
All coils are made with a computer controlled process for precise tolerances
Once the coil has been rolled it is placed into an oil quenching bath at 850 degrees Celsius and hardened to 62 HRC Rockwell Hardness.
the coil is then tempered in an oven at 400 degrees Celsius and is tempered to 54 HRC
If the coil requires a flat seat it is the ground to suit in a computer controlled wet grinder
The coil si then shot peened to stress relieve the outer surface for a uniformed finish and optimal power coat surface
Dipped in phosphate for corrosion protection
Epoxy powder coated for a durable finish and presentation
King Springs
King Spring QE Pajero Sport 50-100kg Rear Coils 40-50mm Lift
$249.00
King Springs leads the way in the design and manufacture of advanced progressive springs with both variable pitch and tapered wire forms. King Springs service all sectors of the automotive market including passenger, commercial and Four Wheel Drive vehicles and various Motorsport categories including circuit, rally, speedway and off-road racing.
King Springs was established in 1956 on Queensland's Gold Coast.
Our complex comprises three adjoining factories spanning 8000 square metres.
Administration, manufacturing and warehousing all function from this one location employing over 70 people.
All King Springs are CAD designed
Only X5K Material is used, this is a new generation of high strength Spring Steel which with-stands higher operating stresses and has superior resistance to sagging.
Peeling & Tapering - Bar peeling and tapering of 1mm from the surface removes all imperfections.
Gas heating is used for the furnaces for their clean and efficient heating
All coils are made with a computer controlled process for precise tolerances
Once the coil has been rolled it is placed into an oil quenching bath at 850 degrees Celsius and hardened to 62 HRC Rockwell Hardness.
the coil is then tempered in an oven at 400 degrees Celsius and is tempered to 54 HRC
If the coil requires a flat seat it is the ground to suit in a computer controlled wet grinder
The coil si then shot peened to stress relieve the outer surface for a uniformed finish and optimal power coat surface
Dipped in phosphate for corrosion protection
Epoxy powder coated for a durable finish and presentation
Carbon Offroad
Carbon Scout Pro - 15000lb Winch V3
$1,299.00
$1,475.00
The Carbon Offroad Scout Pro Extreme Duty Performance Series winches are built with the frequent use winching user in mind who is tackling harsh offroad conditions on a regular basis, or the owner of vehicles which are extremely heavy, kitted out or towing in offroad conditions.
With larger modulus gearsets compared to our CW-12K, increased motor horsepower and standard inclusions from our premium accessory range including the Mega-Pro Winch Rope Thimble and Mega-Pro Premium Fairlead, you are getting a best of the best package straight out of the box.
Did you Know: "Module" is the unit of size that indicates how big or small a gear is. It is the ratio of the reference diameter of the gear divided by the number of teeth.
The Scout Pro series winches share the same 2023 Version 3 Winch Chassis as our tried and tested 12K winch. This allows fitment into most larger 4x4 utes and 4x4 Wagons. Due to the longer 7.0HP Motor, you should consult the technical drawing to determine clearance and fitment length on your winch mount. Most larger vehicles such as RAM, F-Truck and Silverado are generally wide enough to not be a problem, Fitment to any dual cab, 70 series, 200 series or any other similar sized 4wd wagon should be confirmed prior to purchase. The responsibility of the fitment is that of the end-user or installer.
The 15000lb winch comes with 11mm high density pre stretched premium UHMWPE winch rope rated at a whopping 9000kg minimum breaking strain.
Carbon Winch 2023 V3 winch chassis
7.0HP Motor
218:1 heavy duty performance gearbox
11mm Synthetic Rope with HD braced rope thimble
Carbon Offroad MEGAPRO Premium CNC billet type 3 hard anodised multi position fairlead
Carbon Offroad MEGAPRO Winch Hook
High performance heavy duty upgraded solenoid unit, the solenoid in this winch is rated to 100amps more than the CW-12K solenoid unit.
Installed weight of 26.7kg
CW-XD15
12V DC performance specs (first layer of drum)
Line Pull
Line Speed
Motor
Pull by layer
Lbs.(Kgs.)
FT./min(M/min.)
Current
layer/Lbs(Kgs.)
0
27.9(8.5)
65 amps
1/15,000 (6810)
2000 (910)
11.8(3.6)
120 amps
2/12,700(5765)
6000 (2720)
9.5(2.9)
160 amps
3/10,770 (4890)
10000 (4540)
6.6 (2.0)
215 amps
4/9,130(4145)
13000 (5900)
4.6 (1.4)
265 amps
15000 (6818)
3.6 (1.1)
380 amps
Carbon Offroad
Carbon Recovery Ring and Soft Shackle Combo
$99.95
$118.00
Save $$$ and get a
Carbon 10000kg Recovery Ring and
Carbon Offroad 15000kg Soft Shackle Combo Deal!
Carbon Recovery Ring Information -
10,000KG
The Monkey Fist Solid Recovery Ring brings a new dimension to the Carbon Offroad stable of lightweight and strong recovery items.
This solid billet 6061 T6 Aluminium Recovery Ring which is designed to be used with the Monkey Fist soft shackle will allow you to setup a double line pull with your synthetic rope electric winch.
With lasered branding not embossed, CNCed or stamped branding affecting the operation of the ring against the soft shackle, and a low friction co-efficient anodised finish, this solid recovery ring will provide years of trouble-free double line pulls.
Carbon Monkey Fist Soft Shackle Infomation -
The Carbon Offroad Monkey Fist Soft Shackle is an absolute winner! The 10mm UHMWPE rope is rated at 15 tonnes minimum breaking strain and with a super heavy duty braided tight sheath over the core, this shackle is built to take some abuse.
Mininum Breaking Strain - 15000KG
The oversized Monkey Fist knot will ensure that there is Zero chance of the shackle ever coming apart during a recovery.
The braided heavy duty sheath allows you to go straight through a regular recovery point. Make sure it's in good nick though as the shackles can be damaged if the recovery point has nicks and burrs from previous use.
Easy disassembly of the shackle after load is applied is just as easy if not easier than a steel shackle.
You can use rope shackles for a number of uses:
Connecting your vehicle to a snatch strap or kinetic rope
Connecting a tree trunk protector strap to the winch hook
Connecting two straps together to extend your reach.
It also gives you further options like using it as an attachment point around a chassis rail or crossmember
Includes storage bag
Carbon Offroad
Carbon Winches Australia 24m x 11mm Synthetic Rope Spliced with thimble
$10,000.00
Carbon Winches Australia 24m x 11mm Synthetic Rope Spliced with thimble
Carbon Offroad
Carbon MT2.0 Shock Boot Short - Black
$10,000.00
Shock boot to suit Carbon Offroad 2.0MT shock absorber. and
and
Please measure the and length from the welded washer on the shaft and to the shock body to ensure correct fitment. and
and
Long Shock Boot - 26 cm Long and and x 6cm Wide
and
Short Shock Boot - 18 cm Long x 6cm Wide and
and
Carbon Offroad
Carbon MT2.0 Shock Boot Long - Black
$10,000.00
Shock boot to suit Carbon Offroad 2.0MT shock absorber. and
and
Please measure the and length from the welded washer on the shaft and to the shock body to ensure correct fitment. and
and
Long Shock Boot - 26 cm Long and and x 6cm Wide
and
Short Shock Boot - 18 cm Long x 6cm Wide and
and
and
and