
Carbon Offroad
1 x PAIR Carbon rear coil 100-150kg standard lift
$280.00
The coils packaged with the YP654-2530-A-YAUD-R Kit box. 150-200kg constant load.

Carbon Offroad
1/4 inch airline for breather kit. Orange colour - sold per metre
$3.95
Carbon Winches winch motor breather parts kit - no hose included.
3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.
Included in the kit:
Right angle push to fit threaded breather to motor fitting
right angled mounting bracket
self drilling mounting screw with urethane washer
brass porous breather fitting and push to fit fitting for the breather end


Carbon Offroad
12 Volt Winch Control Box V2 - Complete with wireless controller
$199.00
$249.00
This Carbon Offroad 12-volt Control Box is a sophisticated, complete replacement unit, featuring both wired and wireless control capabilities. It's engineered as a direct replacement for our v3 Scout, 12kV3, and v2 winch ranges, and also offers broad compatibility as a highly effective replacement for most other winches on the market. Please verify fitment for your specific application.
Experience enhanced convenience and safety with the integrated wireless remote, allowing you to operate your winch securely from within your vehicle. This advanced control box ensures consistent power delivery for precise winching, replacing older, less efficient systems with a modern solution.

Carbon Offroad
25mm Winch Mount Spacer Kit
$34.00
This winch mounting spacer kit was requested by owners of winch bull bars that were specifically made to fit the narrow style Warn High Mount Winches. A lot of people simply want to run a low mount style winch like the Carbon Winch CW-12k winch. The main issue with these high mount winch bullbars is the centre cradle usually has wings that sweep back to the main part of the bar, meaning the wider low mount winch will hit on the electric motor side before it's able to reach the mounting cradle surface. and
and
Our 25mm thick spacers will provide sufficient clearance rearward to clear the motor on the bullbars. We slotted the holes to allow for tolerances on the bar and allow you to position the spacer to your desired mounting position. and
and
There are no bolts supplied with this kit, due to multiple applications and mounting situations it's hard to cater for every application. You can source Grade 8.8 high tensile mounting bolts in your required length from any hardware or bolt supplier. and
Specs: and
6061 T6 Aluminium - Australian Made
25mm thick
38mm wide
4 x Spacers in kit. and

Carbon Offroad
316 stainless steel Tie bar bolts
$10.00
316 stainless steel Tie bar replacement bolts and spring washers


Carbon Offroad
400 Amp Mega Fuse Mount with Fuse and Cover
$41.95
A great addition to any winch installation giving you piece of mind.
Can be used for many applications
400amp MEGA fuse block with fuse
Included
Mega Fuse Holder
Clear Cover
1 x 400amp Mega Fuse
Plated Hardware


Carbon Offroad
5/16 INCH FORGED SILVER HOOK
$10.00
Hook comes as is no box good condition, parts included as seen in the photos.
minor surface scratches


Ultra Vision
Anti-Theft Nuts
$27.00
Nitro Light Bar Base Mounts 6mm Nitro Light Bar Side Mounts 8mm Nitro Driving Lights 10mm

EcoXGear
ATEBR660-2PK
$129.99
ECOXGEAR ATEBR660-2PK UHF CB Antenna
ON-ROAD: Elevated Feed Barrel Spring Base with Twin Antenna Whip (2.3dBi / 6.6dBi)
Tech Specs
Features
UHF CB 477MHz, Ground Independent Design
Whip Length (2.3dBi: 14cm / 6.6dBi: 68cm)
Antenna Total Length (2.3dBi: 44cm / 6.6dBi: 98cm)
2.3dBi Lower Gain Antenna for Rounded Pattern Operation. Suitable for use in cities and built-up areas.
6.6dBi Higher Gain Antenna for Longer Flatter Pattern Operation. Suitable for On-road long flat areas.
4.5m Low Loss Coax Cable
Pre-terminated FME Female Connector
PL259 Adapter
Size & Weight
Antenna Total Length
Length: 44cm (w/ 2.3dBi - Short Whip)
Length: 98cm (w/6.6dBi - Long Whip)
What's inside the box
1 x ATEBR660 Antenna
1 x 2.3dBi Whip
1 x 6.6dBi Whip
PL259 Adapter

EcoXGear
ATEPL660-2PK
$99.99
ECOXGEAR ATEPL660-2PK UHF CB Antenna
ON-ROAD: Elevated Feed Parallel Spring Base with Twin Antenna Whip (2.3dBi / 6.6dBi)
Tech Specs
Features
UHF CB 477MHz, Ground Independent Design
Whip Length (2.3dBi: 14cm / 6.6dBi: 68cm)
Antenna Total Length (2.3dBi: 44cm / 6.6dBi: 98cm)
2.3dBi Lower Gain Antenna for Rounded Pattern Operation. Suitable for use in cities and built-up areas.
6.6dBi Higher Gain Antenna for Longer Flatter Pattern Operation. Suitable for On-road long flat areas.
4.5m Low Loss Coax Cable
Pre-terminated FME Female Connector
PL259 Adapter
Size & Weight
Antenna Total Length
Length: 39cm (w/ 2.3dBi - Short Whip)
Length: 93cm (w/6.6dBi - Long Whip)
What's inside the box
1 x ATEPL660 Antenna
1 x 2.3dBi Whip
1 x 6.6dBi Whip
PL259 Adapter


Ultra Vision
ATOM 45W LED Work Lamp
$309.00
ATOM 45W LED Work Lamps have proved their high performance and rugged construction in some of the harshest environments in the country. The ATOM covers a wide range of applications from work lights on 4WD’s and light vehicles to lighting stairways, gangways and service areas on large machines, or additional lighting to camp areas. Its high light output, along with its IP68 waterproof rating, makes it extremely versatile. ATOM Work lamps are engineered & made in Australia and come with a 5 Year Warranty
SPECIFICATIONS Wattage 45 Watts Light source 9 x 5w LEDs Light Output – Raw 5,250 Lumens Light Output – Effective 4,180 Lumens Voltage 10-36V Current draw 1.9A Opp temp -40 deg C to +85 deg C Waterproof Rating IP69 Connector Type Plugs 2 Pin Deutsch Housing Die-Cast Alloy Outer Lens Construction Polycarbonate Brackets 4mm Stainless Steel Colour Temperature 4000k or 5700K Lifespan 50,000 Hours Dimensions 100 x 100 x 90 mm Net Weight 1.4kg EMC Rating CISPR 25 Class 3 Mounting Suitable Upright or Pendant Mount Beam Type Wide Flood or Euro Beam Warranty 5 years


Ultra Vision
Atom 60 LED Work Lamp
$419.00
The ATOM 60 LED work lamp offers the latest high-powered LED technology, designed for use on larger agricultural machinery. Electronic Thermal management ensures a minimum of 50,000 working hours is achieved, even when used continuously. Utilising a 5mm stainless steel bracket with 145° of adjustment, the ATOM 60 is one of the most versatile work lamps available. Beam Pattern
#footable_24191 { font-family: ; font-size: px; } #footable_24028 { font-family: ; font-size: px; } #footable_24190 { font-family: ; font-size: px; } #footable_24040 { font-family: ; font-size: px; }

EcoXGear
ATPA230
$50.99
ECOXGEAR ATPA230 UHF CB Antenna
A Portable and Strong Magnetic Antenna Kit for Sedan, Truck, 4WD and Agricultural Environments.
The Strong Magnetic Base helps to keep the Antenna attached to any steel surface on a vehicle (for Optimal Performace, we recommend using it on the rooftop)
Tech Specs
Features
UHF CB 477MHz, Ground Independent Design
Antenna Total Length (2.3dBi: 17.6cm)
2.3dBi Lower Gain Antenna for Rounded Pattern Operations. Suitable for Off-road Hilly Areas and Mountanious Terrains
3.3m Low Loss Coax Cable
Pre-terminated FME Female Connector
PL259 Adapter for EXG1000, 3000 for FIXED MOUNT UHF CB
FME/SMA Adapter for EXG500 for HANDHELD UHF CB
Size & Weight
Antenna Total Length
Length: 17.6cm (w/ 2.3dBi)
What's inside the box
1 x ATPA230 Antenna
PL259 Adapter
FME / SMA Adapter

EcoXGear
ATRD230
$219.99
ECOXGEAR ATRD230 UHF CB Antenna
OFF-ROAD: Heavy Duty Radome Antenna with Aluminium Ferrule & Interchangeable Large Barrel Style Stainless Steel Spring
Tech Specs
Features
UHF CB 477MHz, Ground Independent Design
Whip Length (2.3dBi: 53cm)
Antenna Total Length (2.3dBi: 66cm)
2.3dBi Lower Gain Antenna for Rounded Pattern Operation. Suitable for Off-road Hilly Areas and Mountainous Terrains
4.5m Low Loss Coax Cable
Pre-terminated FME Female Connector
PL259 Adapter
Weather Cap
Allen Key
Size & Weight
Antenna Total Length
Length: 66cm (w/ 2.3dBi - Short Whip)
What's inside the box
1 x ATRD230 Antenna
Allen Key
PL259 Adapter
Weather Cap

EcoXGear
ATRD660
$279.99
ECOXGEAR ATRD660 UHF CB Antenna
OFF-ROAD: Heavy Duty Radome Antenna with Aluminium Ferrule & Interchangeable Large Barrel Style Stainless Steel Spring
Tech Specs
Features
UHF CB 477MHz, Ground Independent Design
Whip Length (6.6dBi: 104.8cm)
Antenna Total Length (6.6dBi: 118.0cm)
6.6dBi Higher Gain Antenna for Longer Flatter Pattern Operations. Suitable for OFF-ROAD Flat Open Areas
4.5m Low Loss Coax Cable
Pre-terminated FME Female Connector
PL259 Adapter
Weather Cap
Allen Key
Size & Weight
Antenna Total Length
Length: 118.0cm (w/ 6.6dBi - Long Whip)
What's inside the box
1 x ATRD660 Antenna
Allen Key
PL259 Adapter
Weather Cap

Carbon Offroad
Battery Isolator Connector Cable 35cm 25mm2
$9.99
35cm long 25mm2 Battery cable used to connect a battery isolator switch to the battery.


Ultra Vision
Can Bus High Beam Output Interface
$209.95
Installing driving lights or light bars onto modern vehicles can be a frustrating and time-consuming task. If you’re in the market for a light-bar or driving lights but there is no high-beam wire on your vehicle’s headlights, the CANM8 CAN Bus High Beam Output Interface allows for a seamless communication and integration with the vehicle’s onboard computer system. It provides a high beam output signal for aftermarket lights, offering greater control and functionality. Allowing for a cleaner and more efficient installation process and requiring no modifications to your vehicle’s electrical system, it’s a solution for those who need additional high beam control functions for their vehicle. The CAN Bus High Beam Output Interface is a single output CAN Bus that detects high-beam activity on vehicles with CAN Bus wiring and converts it into a 12v output for the vehicles driving light circuit. This means that your driving lights or light bar will activate when a high-beam signal is detected, giving you an easy and convenient way to use your upgraded lighting on a modern vehicle. The kit includes: 1x Vehicle Interface 1x Wiring Harness Vehicle Specific Instructions Click here to see which vehicles this product is compatible with.


Carbon Offroad
Carbon 12K - 12000lb Winch V3 - BYO Hook
$975.00
$1,049.00
⚠️ Please Note: This listing is for the winch only.No hook or soft shackle is included in this package. The winch comes with the winch accessory kit only – perfect if you already have a hook.
The all-new feature-packed Version 3 Carbon 12K Winch delivers a high-performance recovery solution trusted by 4WD enthusiasts across Australia. Designed to make your installation easier and your recoveries safer, this winch features a robust construction, advanced waterproofing, and dependable electronics that work when you need them most.
With an upgraded IP68 rating, you can confidently take on water crossings, mud runs, and everything in between. A breathable membrane motor breather handles temperature fluctuations, while your recoveries are powered via both wireless and wired remotes (both included) – keeping you safe in the driver’s seat.
IP68 Explained:6 – Complete protection against dust and dirt8 – Water submersible up to 1.5m for 30 minutes (not during operation)
Whether you’re tackling Tassie’s toughest tracks or cruising up to Cape York, the Carbon Winch is a proven performer. It’s backed by a 5-year electrical & water ingress warranty, plus a lifetime geartrain warranty – with a full range of spare parts stocked right here in Australia.
Installation is made easy with clear instructions, and an included isolator switch with extra cabling ensures your winch is powered off when not in use.
Mount the control box your way – on the winch, above the drum, or remotely on your vehicle using the multi-fit bracket system.
At just 19.0kg, this is one of the lightest 12K winches in its class – ideal for keeping your GVM in check without compromising on performance.


Carbon Offroad
Carbon 12K - 12000lb Winch V3 with MegaPro Hook
$1,049.00
The Carbon 12K is a lightweight, high-performance 12000lb winch designed to handle tough off-road conditions.
Engineered in Australia and refined through real-world use.
With a powerful 6.2HP motor, IP68 waterproof rating, and a durable triple planetary gearbox, it’s built for consistent pulling power through mud, sand, and steep terrain.
Supplied as a complete kit with everything you need - wired and wireless remotes (both included), synthetic rope, remotes, CNC alloy fairlead, isolator switch, and all mounting hardware - it’s ready for installation straight out of the box.
The control box offers flexible mounting options, and the multi-fit fairlead ensures compatibility with most bars. Backed by a lifetime mechanical warranty and 5-year electrical and water ingress cover, the Carbon 12K Winch delivers long-term value with no compromises.
River crossings and mud runs are stress free, this winch features a breathable membrane style motor breather for heat expansion and contraction. The Carbon Winch gets your recovery done with ease by using the wireless or wired remote (both included) from the safety and convenience of your driver's seat.
IP68 meaning - Ingress Protection6 - Can withstand dust and dirt8 - Can be submerged under freshwater for 30 minutes up to 1.5m depth, but not during operation.
The Carbon Winch is a proven performer with year on year sales growth and countless recoveries from the mud bogs of Tassie to the river crossings of the Cape. For peace of mind it's backed here in Australia by a class leading 5 year water ingress & electrical warranty and a lifetime geartrain warranty. We also stock a warehouse of replacement parts here in Australia to get you back winching if the need arises.
If you're capable with a few basic tools, installing a Carbon Winch is easy, with step by step instructions and many extras included to get the job done. We also thought of your safety by including an isolator switch with extra cabling, so when you're not using your winch it's safely turned off and no live power wires are at the front of your vehicle.
Mounting the control box is easy with a multi fit system that can either be mounted on the winch, above the winch drum or motor. Or with the bracket can be mounted to the vehicle or on top of your bullbar. As you know, "looks" are a big part of any 4x4 build, so we have included in your winch kit an ultra sexy CNC'd anodised alloy signature Carbon fairlead paired with our own robust designed hook that makes you stand out from the crowd. Weight is a serious consideration with all 4wd accessories, the Carbon Winch is super lightweight at only 19.0kg
Carbon Winches 12K Winch is a 12000lb line pull winch and can meet the rugged demands of off-road and utility use in Australian conditions. It is designed to deliver the best value, reliability and service life for a winch user.
Get a winch you can trust.


Carbon Offroad
Carbon 12K - 12000lb Winch V3 with Soft Shackle
$999.00
The all new feature packed Ver 3 12000lb Winch from Carbon Offroad delivers a 4wd winch package boasting many extras to make the installation and use of your winch that much easier.
The Carbon Winch features a newly upgraded rating of IP68, so your river crossings and mud runs are stress free, featuring a breathable membrane style motor breather for heat expansion and contraction. The Carbon Winch gets your recovery done with ease by using the wireless or wired remote (both included) from the safety and convenience of your driver's seat.
IP68 meaning - Ingress Protection6 - Can withstand dust and dirt8 - Can be submerged under freshwater for 30 minutes up to 1.5m depth, but not during operation.
You want the reliability of a winch that will perform when you need it to, time after time.
The Carbon Winch is a proven performer with year on year sales growth and countless recoveries from the mud bogs of Tassie to the river crossings of the Cape. For peace of mind it's backed here in Australia by a class leading 5 year water ingress & electrical warranty and a lifetime geartrain warranty. We also stock a warehouse of replacement parts here in Australia to get you back winching if the need arises.
If you're capable with a few basic tools, installing a Carbon Winch is easy, with step by step instructions and many extras included to get the job done. We also thought of your safety by including an isolator switch with extra cabling, so when you're not using your winch it's safely turned off and no live power wires are at the front of your vehicle.
Mounting the control box is easy with a multi fit system that can either be mounted on the winch, above the winch drum or motor . Or with the bracket can be mounted to the vehicle or on top of your bullbar. As you know, "looks" are a big part of any 4x4 build. Weight is a serious consideration with all 4wd accessories, the Carbon Winch is super lightweight at only 19.0kg
Carbon Winches 12K Winch is a 12000lb line pull winch and can meet the rugged demands of off-road and utility use in Australian conditions. It is designed to deliver the best value, reliability and service life for a winch user.
Get a winch you can trust - Get a Carbon Winch


Carbon Offroad
Carbon 3.0k 3000lb ATV/Trailer Winch
$349.00
$425.00
Carbon CW-3U 3000lb Light-Duty Trailer & Utility Winch
The Carbon CW-3U 3.0K 3000lb Winch delivers exceptional value, combining reliability and premium quality in a compact design. Built for light-duty applications with a 3,000 lb (1360 kg) capacity, this winch is engineered to handle a variety of towing and utility tasks effortlessly.
Designed with convenience in mind, it features both a handheld remote and a wireless remote control, allowing seamless operation of the power-in/power-out functions. Enhanced with tie rods for added stability, the CW-3U ensures durability and performance when you need it most.
Key Features & Specifications:
Rated Line Pull: 3,000 lbs (1360 kg), single-line
Motor: 12V DC, 1.5 HP Permanent Magnet Motor
Remote Controls:
Wired remote with 12 ft (3.7m) lead
Wireless remote included
Geartrain: Single-stage planetary
Gear Ratio: 153:1
Clutch (Free-Spooling): Split ring gear
Brake System: Self-locking gear train (rated load holding)
Drum Dimensions: 1.26” diameter × 2.87” length (32mm × 73mm)
Synthetic Rope: 43 ft, 3/16” diameter (13m, 4.8mm)
Fairlead: Roller
Mounting Bolt Pattern: 3.0” × 4.87” (76mm × 124mm)
Winch Dimensions: 12.2” × 5.0” × 5.0” (310mm × 127mm × 127mm)
Packing Dimensions: 15.7” × 7.9” × 8.7” (400mm × 200mm × 220mm)
Shipping Weight: 22 lbs (10 kg)
Warranty: 1 year
The Carbon CW-3U is an excellent choice for small trailers, ATVs, and light-duty applications, offering smooth operation, powerful performance, and reliability in a compact package.
Upgrade your towing experience with the Carbon CW-3U Winch today!
12V DC PERFORMANCE SPECS (first layer of drum)
Line PullLbs.(Kgs.)
Line SpeedFT./min(M/min.)
MotorCurrent
Pull by layerlayer/Lbs(Kgs.)
0
20.4(6.2)
10Amps
1/3000(1360)
1000(453)
14.2(4.3)
65Amps
3/2725(1235)
2000(907)
10.9(3.3)
96Amps
3/2480(1125)
3000(1360)
7.7(2.4)


Carbon Offroad
Carbon 4.5k 4500lb ATV/Trailer Winch
$459.00
Carbon Offroad 4,500 lb ATV/UTV Winch – Compact, Powerful, and Versatile
Upgrade your off-road adventures and heavy-duty tasks with the Carbon Offroad 4,500 lb Capacity Winch, designed for ATVs, UTVs, side-by-sides, car trailers, and equipment transport.
Enhanced Design & Performance
Since September 2021, this winch has been redesigned for superior durability and ease of use, featuring:
Improved clutch handle operation for smoother control
Enhanced sealing for wet and rugged conditions
Upgraded components & finish for long-lasting performance—all at the same great price
Compact & Easy to Mount
Integrated mounting plate for quick and simple installation
Compatible with trailers, ATVs, and buggies
Easily secures to an existing pedestal or designated winch mount
Wireless Control for Maximum Convenience
Includes free wireless remote control for effortless operation
Also features a handlebar mini-rocker switch for direct control from your ATV
Versatile Applications
Ideal for a wide range of uses, including:
Small car and equipment trailers
Loading heavy equipment into vans
Retrieving stuck ATVs, UTVs, or buggies
Pulling boats (tinnies) onto trailers
Opening cattle gates on livestock trucks
Key Features:
4,500 lb (2,040 kg) line pull for strong and reliable performance
Power in & out operation with load-holding and dynamic braking
Sealed permanent magnet motor for high efficiency with low amp draw
Full metal 3-stage planetary gear train for greater pulling force and durability
Synthetic rope for lightweight, high-strength, and safer winching
Aluminium Hawse fairlead to reduce friction and extend rope life
Specifications:
Model: CW-45
Rated Line Pull: 4,500 lbs (2,040 kg)
Motor: 12V DC, 1.9HP
Remote Control: Handlebar Mini-Rocker & Wireless Remote (included)
Geartrain: 3-Stage Planetary, 176:1 ratio
Brake: Dynamic & Mechanical
Synthetic Rope: 43’ (13m) x 1/4” (6.35mm)
Mounting Bolt Pattern: 3.0” x 6.59” (76mm x 167mm)
Winch Dimensions: 14.9” x 4.7” x 4.5” (379mm x 120mm x 115mm)
Shipping Weight: 12.2 kg
This rugged, compact, and high-performance winch is a must-have for anyone looking to tackle tough terrains or simplify heavy lifting.
Get yours today and make every job easier!
12V DC PERFORMANCE SPECS (first layer of drum)
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
MotorCurrent
Pull by layerlayer/Lbs(Kgs.)
0
20.4(6.2)
31 Amps
1/4500(2040)
1000
14.2(4.3)
65Amps
2/3750(1700)
2000
10.9(3.3)
96Amps
3/3510(1595)
3000
7.7(2.4)
125Amps
4/3300(1500)
4500
4.9(1.5)
175.Amps

Carbon Offroad
Carbon 8 Tonne x 20m Winch Extension Strap
$164.00
Extend your reach with the Carbon Offroad Winch Extension Strap.
You've probably encountered many situations where your desired tree or anchor point is just a bit too far away. The Carbon Offroad Winch Extension Strap is your solution. This essential winch accessory provides the extra length you need to safely and effectively tackle tough recovery situations. It's also useful for reducing the distance to an anchor when performing a double line pull.
Key Features:
8000kg rating
20 meters long
UV resistant
Reinforced loops at both ends
Multi-stitched ends
60mm wide
Made from high-strength polyester


Carbon Offroad
Carbon Dual-Sided Bucket Hat
$39.00
The Carbon Dual-Sided Bucket Hat gives you twice the style in one practical, adventure-ready lid. Featuring a bold Carbon wrap design on one side and stealth black on the other, this fully reversible hat is built from lightweight polyester and sized for all-day comfort
Key Features & Benefits:
Reversible Design – Bold Carbon wrap on one side, clean black on the other
One Size (58cm) – Comfortable fit for most head sizes
Lightweight Polyester Fabric – Breathable, quick-dry, and perfect for outdoor use
Casual Everyday Style – Ideal for campsites, events, and summer days on the tracks
Double the Look – Flip it to match your mood or your gear


Carbon Offroad
Carbon Essential Camp Chair - Graphic Wrap
$25.00
Whether it’s trackside action, campfire hangs, or just chilling under the awning, the Carbon Essential Camp Chair brings comfort and style to every stop. With a stainless steel frame, bold branding, and built-in cupholder, it’s the ultimate all-rounder for off-road enthusiasts.
Key Details:
Signature Carbon Graphic Wrap – Custom branded look for true fans
Thick PE Material – Hard-wearing fabric that handles dust, dirt, and sun
Stainless Steel Pipe Frame – Strength you can rely on
X-Frame Support System – Reinforced for better balance and durability
Mesh Cupholder – Practical spot to keep your drink in reach
Anti-Slip Feet – Grip when you need it
120kg Max Load Rating
Packs down with a carry bag included


Carbon Offroad
Carbon Essential Keyring
$9.00
Built for your everyday essentials. The Carbon Offroad Keyring features a tough split ring and stylish dual-colour design — black on one side, blue on the other. It’s perfect for keeping your keys or winch remote in check.
Size: 2 x 10cm
Material: Durable PVC
Double-sided with Carbon Offroad branding
Blue and black two-tone design
Strong metal ring for secure attachment
Great for 4WD keys, winch remotes, or gear bags


Carbon Offroad
Carbon Frontier Snapback
$39.00
Whether you’re turning spanners in the shed, scouting a new trail, or kicking back at camp, the Carbon Frontier Snapback is made to keep you covered in all the right ways. Featuring a flat brim and breathable mesh back, it’s the perfect blend of comfort, style, and offroad attitude.
Key Features & Benefits:
Flat Brim Design – Keeps your focus forward while adding a sharp, structured look
Breathable Mesh Back – Ventilated for airflow during long days out in the elements
Adjustable Snapback Closure – Fits just right, every time
Adjustable Snapback Fit – One size fits most with classic rear closure
Embroidered Carbon Logo & Aussie Flag – Quality stitching that stands out and lasts
Trail-Tested Comfort – Ideal for long days on the road, at events, or out in the wild


Carbon Offroad
Carbon Insulated Drink Bottle 750ML - Blue
$35.00
The Carbon Insulated Drink Bottle is a no-fuss, everyday essential for staying hydrated on the go. With its durable stainless steel build, double-wall insulation, and practical wide-mouth design, it’s made to handle everything from daily use to weekend trips. Finished in a bold blue with Carbon Offroad branding, it’s a simple way to rep the brand wherever you go
Key Features:
750ML / 24oz Capacity – Just the right size for all-day hydration
Vacuum-Insulated, Double-Wall Construction – Keeps your drinks at temp longer
Wide Mouth Opening – Easy to sip, fill, and clean
Flex Cap with Carry Loop – Convenient to carry or clip to your gear
Matte Blue Finish – Clean look with laser etched Carbon branding