Carbon Offroad
Mounting bracket - Battery Isolator Switch - Stainless
$9.95
This local 1.6mm stainless steel battery isolator mounting bracket is designed to be used with the supplied battery isolator switch in the Carbon Offroad Winch kits. The switch can be mounted on the inside or outside faces of the bracket on both sides, giving you various setup options to suit the space available in your engine bay.
The mounting holes are 56mm hole centres and can be used for any similar type battery isolator switch on the market.
Carbon Offroad
Carbon Offroad Stainless Steel Black Powdercoat Pull Up Number Plate Bracket
$59.95
Carbon Offroad Stainless Steel Pull Up Number Plate Bracket
The Carbon bolt on number plate bracket is compatible with both alloy hawse fairleads and roller fairlead mounting systems. It allows you to mount a number plate over the outlet of the fairlead and pull and it out of the way during a winch recovery.
Made from laser cut 1.5mm stainless steel with a semi gloss powdercoat in black.
Easy to use and makes a recovery that much easier.
Mounting hardware not included.
1.5mm stainless steel - black powdercoat finish
Laser cut
Pull up cantilever style with locking knob
Number plate mounting surface - 441mm wide 144mm high
Rear and bracket 340mm wide 88mm high
Number plate mounting surface and can be cut down for a custom finish
Kaon
FLIP-UP Number Plate Mounting Bracket - Kaon - Aussie Made
$69.95
Flip up number plate holder. 165mm and 210mm hole spacing
Stainless Steel
Low profile design. 26mm offset
Flips your number plate up to 120 degrees
Great for access to the winch.
Will prevent damage or loss of your number plate when doing water crossings.
Made in Australia
Carbon Offroad
25mm Winch Mount Spacer Kit
$34.00
This winch mounting spacer kit was requested by owners of winch bull bars that were specifically made to fit the narrow style Warn High Mount Winches. A lot of people simply want to run a low mount style winch like the Carbon Winch CW-12k winch. The main issue with these high mount winch bullbars is the centre cradle usually has wings that sweep back to the main part of the bar, meaning the wider low mount winch will hit on the electric motor side before it's able to reach the mounting cradle surface. and
and
Our 25mm thick spacers will provide sufficient clearance rearward to clear the motor on the bullbars. We slotted the holes to allow for tolerances on the bar and allow you to position the spacer to your desired mounting position. and
and
There are no bolts supplied with this kit, due to multiple applications and mounting situations it's hard to cater for every application. You can source Grade 8.8 high tensile mounting bolts in your required length from any hardware or bolt supplier. and
Specs: and
6061 T6 Aluminium - Australian Made
25mm thick
38mm wide
4 x Spacers in kit. and
Carbon Offroad
1/4 inch airline for breather kit. Orange colour - sold per metre
$3.95
Carbon Winches winch motor breather parts kit - no hose included.
3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.
Included in the kit:
Right angle push to fit threaded breather to motor fitting
right angled mounting bracket
self drilling mounting screw with urethane washer
brass porous breather fitting and push to fit fitting for the breather end
Carbon Offroad
Carbon Winch Motor Breather Parts kit - no airline
$19.95
Carbon Winches winch motor breather parts kit - no hose included.
3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.
Included in the kit:
Right angle push to fit threaded breather to motor fitting
right angled mounting bracket
self drilling mounting screw with urethane washer
brass porous breather fitting and push to fit fitting for the breather end